Question about 2002 Land Rover Freelander
1st you need to get the window down are all fuses good ....if so you can get the inside panel off and gain access to the motor is the motor bad well you'll need to use a test light and determine power to it with a good ground and test with the key in the on position if power is present then make sure the connection is solid and work the window button if the trunk itself is not fully closed the window switch may not work as well after all above is checked remove the bolts from either the window itself 10 mm i believe or 7/16 wrench to remove the glass then you may open the lid and repair as needed and reassemble the glass close the lock_s itself and use teh switch to drop window down and then pull on the release handle to open the locks back up n close lid hatch and ensure the proper working of the window you may need to adjust the window one way or the other for alignment and if working good at this point reinstall the rear panel and yer done
Posted on Sep 07, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The L/R Handbook explains what needs to be done if and when the battery is replaced or disconnected/reconnected. From what you have said, it seems that you need to try the recalibration as per refitting the battery.
Posted on Mar 11, 2010
Tips for a great answer:
Jun 05, 2014 | 2002 Land Rover Freelander
Aug 22, 2011 | 2004 Land Rover FreeLander
Jun 14, 2011 | 2004 Land Rover FreeLander
Jan 05, 2010 | 2003 Land Rover Freelander
Sep 02, 2009 | 2003 Land Rover Freelander
Jul 30, 2009 | Land Rover Freelander Cars & Trucks
Jul 02, 2009 | 2004 Land Rover FreeLander
Jun 13, 2009 | 2002 Land Rover Freelander
Jun 03, 2009 | 2002 Land Rover Freelander
Mar 03, 2009 | 1999 Land Rover Discovery
756 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: