Most thermostats are located in the upper radiator hose housing mounted to engine block. Make sure engine is cold put a catch pan under your car to catch any antifreeze that comes out. Remove the two bolts holding the housing on the engine and remove thermostat and gasket. Clean engine block where gasket goes very good and also the housing, have to remove all gasket material so when installing new one it will seal and wont cause a leak. Make sure when you put the thermostat back in it goes in spring side down towards engine. Replace housing and bolts. replace lost coolant with a 50/50 mixture in your recovery tank. Start engine let heat to temp and check for leaks.
1,154 views
Usually answered in minutes!
×