Question about Chevrolet Cars & Trucks

2 Answers

What is the engine power of the Chevrolet C50 truck year 1968?

Chevrolet c50 truck

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

If it's a 366 ci around 200

Posted on Aug 15, 2019

Testimonial: "thanks"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 8,546 Answers

Hi.
155 horsepower 1968 250 CID I6 Engine
This engine was capable of producing 155 horsepower at 4,200 rpm and a torque of 235 pound-feet at 1,600 rpm. It came standard with a three-speed manual transmission, while Powerglide and the Hydra-matic transmissions were available as optional upgrades.
or try this link.
Chevrolet Wikipedia
https://www.classicmuscle.com/resources/chevy-ck-trucks-history

Posted on Aug 09, 2019

Testimonial: "thank you very much"

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 1 Answer

SOURCE: Cant find access to battery onSuzuki Boulevard c50

Its under the seat. Take the pillion off then the main seat and its accessable from there.

Posted on Jun 16, 2009

slave2aslave

Terrie Thiessen

  • 302 Answers

SOURCE: Manual for VL800 c50 2006

Hope this one helps:
www.onlinefreeebooks.net/automotive-machinery.../suzuki/

Posted on Sep 23, 2009

sakthi ganesh

  • 324 Answers

SOURCE: truck wouldn't start no power

recharge your battery and check it

Posted on Jan 11, 2010

Comp-U-Doc

Randall Brockmann

  • 148 Answers

SOURCE: Cartridge error c50

It would seem that Dell has a on-going issue with this printer and the cartridge. Try these steps and if it still gives this error you will have to contact Dell.
1. Reseat the Ink Cartridges. 2. Unplug the printer from the back, clean the contacts and the put back the connection.
3. Verify whether the Ink Cartridges are DELL Branded.
4. Try Cartridges Individually.

If you are satisfied with my answer, be sure to click on the "Thumbs-Up". If you have further questions, please feel free to ask them. Thanks for using our service!

Posted on May 15, 2010

Greg McCarthy

  • 1340 Answers

SOURCE: need info on wiring ignition

1968 I was 3!I would say you are most likely going to have to find out from Chevy.If a dealer can't find out,probably a call to Detroit.Good luck! Greg

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the power of engine truck chevrolet c-50 1968


130 - 170 hp

Chevrolet » Series 40 / 50 / 60 '67 (1967 - 1973) In 1967, Chevrolet presented all-new generation of medium and high duty truck lines. These trucks received a new 96" BBC cabs with the design in a style of light-duty models. The compact design of these new short-conventionals allowed the same cab-to-axle dimensions as those of last year's models with wheelbases that were 8 inches shorter. This means that short overall lengths and excellent maneuverability formerly available only with expensive low-cab-forward models, now can be used in conventional design. Gasoline-powered models could be ordered with in-line six or V8 engines. Horsepower ratings ranged from 155 for the 250 Six up to 220 for the 366 V8. Three series (Chevy C40, Chevy C50 and Chevy C60) were available in a total of 24 models with GVW ratings from 10,500 to 27,500 lbs, GCW ratings to 45,000 lbs. Diesel models with horsepower ratings from 130 for the 4-53N Detroit Diesel up to 170 for the DH478 Torq-Flow were offered in the 50 and 60 series. GVW ratings from 16,000 to 27,500 lbs. There were 6 variants of wheelbases: 125" (models 41000, 51000, 61000), 137" (models 41200, 51200, 61200), 149" (models 41400, 51400, 61400), 167" (models 41700, 51700, 61700), 189" (models 52000, 62000) and 203" (model 62300).
Chevrolet Series 40 50 60 67

Jun 15, 2018 | Chevrolet Cars & Trucks

1 Answer

2006 suzuki c50, engine acts like it is out of fuel but only 3.1 gallons can be added


Unit should have a reserve tank switch. BTW, this section is for cars and trucks.

Mar 03, 2018 | Suzuki Cars & Trucks

1 Answer

I have a 1968 Camaro the engine Block has VI023EE how do I tell if it is matching Numbers to the car


I think you first run the vin and see what came in it then check the numbers on the block and see if it matches the the year and model goes in a car like it

Mar 29, 2016 | Chevrolet Camaro Cars & Trucks

2 Answers

I have a small block chevrolet engine with an engine ID code #V12IOXI. Can you tell me what size engine this is and what type vehicle it was from.


Looks like -
V = Flint factory
12 = December
10 = 10th day
XI = 1969 350 engine 2bbl carb C50 or C60 truck

Mar 20, 2016 | Chevrolet Cars & Trucks

1 Answer

Need info on wiring ignition coil for points distributor 1968 chevrolet pick up truck


1968 I was 3!I would say you are most likely going to have to find out from Chevy.If a dealer can't find out,probably a call to Detroit.Good luck! Greg

Aug 13, 2010 | Chevrolet C1500 Cars & Trucks

1 Answer

NUMBERS ON BLOCK


Hello there:

Casting dates are usually expressed this way, “C 18 4.” In this example, the “C” means the month of
March, “18” is the day of the month, and “4” is the last digit of the year. This last digit may mean ’64, ’
74, ’84 or ’94, so you must also check the other characteristics of the block to determine in which
decade and year it was made. Some parts have the decade and year cast on them; these identifiers
look like this: “C 18 84.” GM introduced new model years in September or October of each year, so
when you see a casting date of “L 16 7” for example, this indicates a casting date used in the 1968
model year because it translates into December 16, 1967. A 1968 model Camaro assembled on
January 6, 1968, might contain a number of parts that were cast in December, 1967. Casting dates
should precede hand-stamped engine assembly dates.

Nov 20, 2009 | 1990 Chevrolet Corvette

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...