There is no replaceable fog lamp relay. It's built into the digital instrument panel junction box (IP) and switches power using an intelligent power switch (power transistor) that's soldered to the board.
When you turn on fog lamps the body control module sees the signal from the fog lamp switch. It sends a digital signal to the IP which tells the IPS to power the fog lights. You need to use a pro scan tool to see if the Body control module is receiving the fog lamp request and then see the IP is receiving the command to switch on fog lamps.
SOURCE: 92 buick century head bolt tighten sequence?also
Exhuast manifold torque 38 foot pounds, Head bolts are 38 Foot pounds after you add sealant to the bolts then after torque go another 130 degrees. Tighten center 4 bolts in sequence another 30 degrees.
SOURCE: i need the torque specs for head bolts on a 2001
step 1 22 lb
step 2 - short bolts add 55 degrees - medium bolts add 65 degrees - long bolts add 75 degrees
These are torque to yield and are recommended to be replaced when servicing..
SOURCE: 1997 F150 4x2, upper control arm torque specs,
The torgue spec for the upper control and ball joints is40 to 45 ft lbs they have castle nuts and cotter pins its not that critical the bushing are rubber mounts there much less user your best judgement not to over compress the rubber
124 views
Usually answered in minutes!
×