Question about 2002 Infiniti I35
Brake lights coming on all the time. Thought it was the pedal pad being broken but lights come on even with pedal switch removed from circuit so it is being bypassed. Apparently no fuse for this circuit, MFG may have installed nonremovable fusible link in harness instead. Will have to remove all lightbulbs in tail section and rear window light to be able to charge battery and be able to move the car. YouTube video said to look for 15 amp fuse labeled STOP L. which doesn't exist on my car. Would also like insight on just how the switch is being bypassed for the braking system. No burnt parts of odors. Only use car 1-2 x a week so I don't want to spend hundreds of $$$$$$ having to hunt down ghosts with the electrical system. I ride a bike most of the time so the car is only on rainy days and when I have to carry stuff.
Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Good luck!
Posted on Jan 02, 2017
SOURCE: Left rear brake light stopped working but bulb and fuses are OK.
take the bulb back out have someone sit in car apply brake get your self a circuit tester and check to see if this circuit is carrying efficient 12 volt current! some times in cold weather these bulbs get hot with long period of breaking and when released condensate and rust begins and you get what you have perhaps bad socket! this would be a ideal location to begin and probably end,
Posted on Jan 03, 2009
SOURCE: replaced braked pads - now VDC and Slip Lights are on
I would take the car to almost any auto parts store and ask them to check the ODB II computer for codes and to reset the "Check engine light". Get the code that they tell you and it should go a long way to pointing you in the right direction to fixing this problem. It might also be that when you pumped the brakes that you somehow set a code in the computer from the ABS system and now that you have the brakes pumped up and working correctly resetting the Check engine light might fix your problem.
Good luck! Write back with any code you get and I'll see if I can help you figure out what the problem might be.
Posted on Jan 06, 2009
SOURCE: Left rear brake light stopped working but bulb and fuses are OK.
These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!
Posted on Feb 05, 2009
SOURCE: tail lghts/brake lights
Isn't that mysterious? It took me a few weeks to figure it out. Look carefully under the break pedal. There is this device called a "break light switch". I hope that helps.
Posted on Feb 23, 2009
SOURCE: I put new brakes, front and rear on 1991 Infiniti Q45
go to a auto part like AUTOZONE they have the
code reader to erase the lite in dash it a free service
Posted on Apr 10, 2009
Jul 25, 2016 | Infiniti Cars & Trucks
May 28, 2014 | 2004 Kia Amanti
May 06, 2014 | 2001 Honda Civic
Feb 20, 2014 | 2000 Dodge Stratus
Oct 08, 2013 | Cars & Trucks
Jun 24, 2013 | Cars & Trucks
Jan 14, 2013 | Infiniti I35 Cars & Trucks
Jan 28, 2012 | Infiniti I35 Cars & Trucks
27 people viewed this question
Usually answered in minutes!
×