Suzuki apv
Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins
there is one website more but i don't remember its name it was 2 years back bitman something link this
Try these out brother
SOURCE: what are the valve clearances for a suzuki vitara
year??? there is no 2.0 v6. the valve clearance is not adjustable on this model if it is a v6
SOURCE: Valve Clearance
valve clearance, with engine hot, intake valves are .005-.006 in, exhaust valves are .011 in, if engine is cold then its intake .009-.011 in and exhaust is .007. hope this helps good luck.
SOURCE: What are the valve clearances
For a 1999 Vitara the clearance is
intake (cold motor) 0.13 - 0.17 mm
exhaust(cold motor ) 0.23 - 0.27 mm
Head bolts
Apply engine oil to cylinder head bolts and tighten them
gradually as follows.
(1)
Tighten all bolts to 35 Nm (3.5 kg-m, 25.0 ft. lbs.)
according to numerical order in figure.
(2)
In the same manner as in (1), tighten them to 55 Nm (5.5 kg-m,
40.0 ft. lbs.).
(3)
Loosen ail bolts until tightening torque is reduced to 0 in
reverse order of tightening.
(4)
In the same manner as in (1), tighten them to 35 Nm (3.5 kg-m,
25.0 ft. lbs.).
(5)
In the same manner as in (1) again, tighten them to specified
torque.
Tightening Torque (a): 68 Nm (6.8 kg-m, 49.5 ft. lbs.)
Good Luck
2,800 views
Usually answered in minutes!
×