Replaced bulb and fuses, headlight still doesnt

Replace fuse. If fuse blows again it could be the ballasts have gone bad .

was the correct bulb used? this sounds like a single function bulb was used NOT the bulb that will light with the headlights and ALso produce turn singles

check the dimmer switch all power to the headlights go yhrough the dimmer switch

Check for 12VDC at the connector with your high beams on. Could be the wiring or the connector and no they run on the same fuse.

You may have blown a fuse, check fuses first then before you try to replace the bulb again check for broken wires or the correct bulb

Try checking both a; your fuses, and b; check your bulbs. You should have two fuse boxes, one under hood and one in or under the dash. Check those for bad, blown or weak fuses. And check your headlights bulbs for them being good and their connection. If this doesn't fix your problem, you may check out your highbeam switch.

if 1 headlight is workin its not the fuse as the 2 headlamps and tail lamps are ran off the 1 fuse.. check the connector that the wires aint brokin check bulb aswel hope dis is helpful

as for the headlight, did you check the fuse. on some vehicles there is a fuse for the left and right headlight! the fuse should be in the underhood fuse and relay box.

make sure that the bulb you are using is a 9005 ive seen people instal the wrong bulb and it doesnt work. Same plug different filaments. If thats not the problem maybe a headlight switch acting up. Hope this helps! ~Derek~

Turn on your headlights and check to see if your taillights are working. They act as a fuse to your dashlights, its a safety thing