SOURCE: High-beam indicator does not work
Sorry but the gauges have to be removed to replace the globe.Not the whole dash though,just the gauge surround and gauges only have to be pulled out far enough to get your hand in to change the globe.Good luck
SOURCE: 2001 Toyota Corolla high beam lights are not
Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.
SOURCE: 2005 Ford Focus ZX3 SES, the blue high beam
It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)
27 views
Usually answered in minutes!
×