Just did my springs on my 2014 mitsubishi outlander 3.0l v6 all wheel control and now my 4wd and my 4wd eco mode light's start flashing after about 1km of driving does anyone know what can be the problem?
You left something disconnected. PCM does not need to be reset, there's no way for it to know you have new springs.
More than likely your pcm just needs to be cleared or reset after the replacement. It must be done with a scan tool. If that does not work, they person who replaced the springs may have forgotten to reconnect the electrical plugs. Look underneath for a disconnected connector.
You can try out some guide from here reliable-store. com
they also provide live chat feature for instant help and it's very useful
SOURCE: Mitsubishi Montero
I had the same problem as described here ... quoted "sometimes flashing quickly, slowly, or sometimes turning off. The antilock brake light has also come on several times."
and the dealership told me that the electrical conector that goes externally to the gear drive is getting dirty with oil .... two times I sent the car and they told me the same and solved it ... no charges at least but I having the same problem again ... I really want to know where is that electrical conector just to clean it up or put something that avoid dirty or oil get in it again ...
SOURCE: Service 4wd light intermittent/ Dodge 2500 Power Wagon 5.7 Hemi.
service the transfur case change the oil
SOURCE: 2000 Mitsubishi Montero 4 wheel drive indicator light flashes
get oil changed in gearbox and the switch on the box
SOURCE: 2004 Mitsubishi Montero Sport AWD engaging 4WD High
It's either the sensor on the top of the transfer case, or the one on the front diff. Look here, scroll down to about the third post.
http://msport97.proboards.com/index.cgi?board=faq&action=display&thread=6258
224 views
Usually answered in minutes!
×