At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
door sensor is bad. switch is staying closed allowing juice to interior lights. The door switch is there. have autozone or napa look up the location for you...
You need to remove the door ajar sensors from the doors and clean and lube them. You must remove the interior door panel then remove the door latch. Then twist the switch out of the latch to work on it.
To temporarily solve the light problem, I taped a washer to the inside of the door where the door hits the plunger on the light switch. A permanent solution would be to drill a hole in the door at this spot and put a self taping screw in that will trigger the switch sooner. I figured out the reason the dome light stayed on is due to the courtesy light timer and the lights would have eventually gone off.
your door close switch is non-functional. its located in the door jamb. its a black button the size of a shirt button. usually held in by one or two screws.
I had this problem on my 2003 explorer and took WD40 and gave the lock mechanism a good dose where it meets the clasp on the door jam. Then open and close the doors a couple of times to get them working. They get gummed up and sometimes have a tendency to stick.
×