After re-checking fuses check the ground wire and insure it's free of corrosion
When you check fuses you must use a continuity tester or a volt meter to verify they are indeed not blown also clean the contacts in the sockets and your turn signal switch may be finished and needs replacement your vehicle is now 17-18 years old by manufacturer date sticker so things fail after almost 20 years there could also be a broken wire on that socket but verify fuses so you can eliminate that cause sometimes they look good but are blown out in the corner at the top ok
SOURCE: Reverse lights don't work. Replaced
Check ur CONNECTiON on the transmission reverse switch! Located on ur transmissin itself, raised or go underneath ur vehicle to check on it. Wire connection might have been pulled out by hitting something underneath! Reverse switch might not been working anymore! Taaah!
SOURCE: 2000 Grand Jeep Cherokee Laredo both brake lights
try replacing the sockets in the tailights/brake lights. worked for me. $10 each. i had to replace all of mine because just replacing the brake sockets didn't solve the problem on the right side. you can test it by exchanging tail light for brake light socket and if that works you know it is the socket
look for a ground wire that wasn't installed after the repair or a broken ground wire from the impact
84 views
Usually answered in minutes!
×