Question about Peugeot Cars & Trucks
Check the windshield seal and clean the front right under the windshield. There are usually drain holes for rain water to drain away. If you are getting wet without rain, your AC drip pan drain is probably plugged and needs to be cleared out.
Posted on Oct 12, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: timing marks on peugeot 1.9 tdi
there is a few ways of doing thes the easiest way being using locking pins
you bont have to go and buy a set of locking pins you can use 3 m8 (13mm headded) bolts and a 5mm allen key
there is a hole in the cam pully and 2 holes in the injection pump pully and 1 in the fly wheel
i suggest you lock the fly wheel up first
the hole is located under the starter motor on the front of the block
insert the 5mm allen key and get someone to turn the crank pully clockwise until allen key engages into the fly wheel
the hole in the cam should be at about 25 past
(if it is at 10 to then you neet to remove the pin from the fly wheel and turn the crank 1 full turn)
when the hole is inthe right place you can insert a m8 bolt and wind it in to the head
with this now lined up you should be able to fit the other 2 m8 bolts into the injector pump pully
with this now done your 1.9 tdi engine is timed up
Posted on Dec 07, 2009
Tips for a great answer:
Nov 02, 2016 | 2010 Peugeot 308 SW
Mar 29, 2016 | 2010 Peugeot 308 HDi
Dec 25, 2014 | 2010 Peugeot 308 SW
May 22, 2014 | 2010 Peugeot 308 1.6
Jan 22, 2013 | 2010 Peugeot 308 CC
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: