Take off panel and manually raise the glass. If the motor wont let it go up you will have to unbolt it from the window. Raise glass up by hand and use heavy duty tape around the edges to hold it in place. I had to do this when mine broke.
Https://www.youtube.com/watch?v=56dNy2qTqVA
https://www.youtube.com/watch?v=2tpYisaKNt4
https://www.youtube.com/watch?v=a2Tbvf_tlIY
https://www.youtube.com/watch?v=I_F3ldQvhqk
https://www.youtube.com/watch?v=pnZxYsf8_UI
https://www.youtube.com/watch?v=EXULAuHTups
https://www.youtube.com/watch?v=2tLmH05UKwk
https://www.youtube.com/watch?v=aT3GjpqmoGc
SOURCE: Power Windows won't work
Fuse is good you say? There are four may possible causes listed in this diagnostic article:
http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Windshield_Windows_Window_Does_Not_Roll_Up_Down.htm
Good luck!
Brad
SOURCE: 07 scion tc passenger window wont roll down when lock by driver..
thats cause that what the lock is for so it wont go down
SOURCE: Driver-side window non-respondent (2003 4door Chrysler Sebring)
Your widow regulator is defective or the motor is defective. Remove door panel, using a punch, punch out the rivets, using a !/4 drill out the aluuminum plugs. Remove the regulator and inspect, if its not defective apply bearing grease when mechanism rolls up and down. Rivets must be replaced by 1/4 screws and nuts. Take motor apart, you will find three plastic plugs which have a tendency to disenegrate, replace these with ball bearings, pack the motor and I do mean pack it with wheel bearing grease. Reasemble.
SOURCE: My 1999 Chrysler Sebring does not start. It
chrysler has a TSB on this issue. but for now you will need to replace the starter. But first you should get it diagnosed to be sure
159 views
Usually answered in minutes!
×