Suzuki alto sz4 heater resistor location - Suzuki Cars & Trucks

Question 1

0helpful

1answer

Alto resistor location? Can anyone tell me where the heater resistor is located on a 2010 Alto

NO BLOWER RESISTOR WORKS HOT OR ON A/C.
IT IS JUST IN FRONT OR PART OF BLOWER BASE OUTPUT, THIS IS BECAUSE, THE RESISTOR RUNS
SUPER HOT AND IS BLOWER COOLED.
THE FAN FAIL IN HIGH TOO, NOT TOLD
SUZUKI ALTO. IN INDIA ?
WHAT COUNTRY ? OR VIN NOT TOLD.?
PARTS ARE NOT THE SAME WORLD WIDE
FOR SURE LHD OR RHD, (UK IS RHD)
THE SERVICE MANUAL COVERS THIS BUY ONE?

Jan 23, 2023 • Cars & Trucks

1helpful

1answer

Front hub nut torque for suzuki alto 2009 sz4 thank you

The nut torque is 145 pound feet. (195 NM)

Aug 03, 2018 • Suzuki Cars & Trucks

2helpful

2answers

Workshop manual suzuki alto gl 2003

Hi Leslie:
Here's a link that will direct you to a lot of support manuals.
Looks like Suzuki provides them for free
https://www.google.ca/#q=suzuki+alto+gl+manufactured+2003+haynes+manual
.
Winner!
Cheers

Feb 26, 2016 • Suzuki Cars & Trucks

0helpful

1answer

CAN I HAVE A DIAGRAM OF SUZUKI F6A VACUUM HOSE CONNECTIONS?

in what country, ?
what car?
what year. car.?
vacuum parts vary by , things and boring as SMOG, laws.
each country has there own laws so.....
this is a USA forum and we dont have F6a engines here.
here is a list of cars using F6A.
if it was in USA the under hood sticker shows vacuum map (by law here)

1990.03-1994.11 Suzuki Alto / Alto Hustle
1994.11-1998.10 Suzuki Alto HA/HB/HC/HD11
1998.10-2000.12 Suzuki Alto HA12 / Mazda Carol
Suzuki Cappuccino EA11R
Suzuki Cara
Suzuki Carry
1990.07-1998.10 Suzuki Cervo Mode CN/CP21S, CN/CP22S
Suzuki Every
1995-1998 Suzuki Jimny JA12

Mar 10, 2015 • Suzuki Cars & Trucks

0helpful

2answers

I have s Suzuki alto gl on a 2004 plate heaters are not blowing at all changed fuse but still no luck pls help

we dont have that car in USA, this is a USA forum, so...
plate heaters what on earth are those. Coffee pot heater? Hot plate?

you meant HVAC heater dead. in all modes>?
and is the blower blowing on high? is it?
that is first.
but first first, is engines must be fully hot or there will be no heat.

Mar 01, 2015 • Suzuki Cars & Trucks

1helpful

1answer

My suzuki alto stantard SZ 5 DOOR 2012 modle heating is now working Please advise

HVAC, the heater is not working?
the resistor only makes fan work , on low speeds.
1: is the fan blowing? heard and felt? on HIGH?
2: is engine coolant at 180F temp, or more holding, IT must, or there will not be heat,.
3: are both fire wall heater core hoses hot, fully? if one is cold the core is blocked. (flush it out)
4: Ok, we have hot water coolant to core (heater core) so is the damper open?, yes, then now you have heat for sure.

if all that is greek , get car serviced.
or buy the FSM book read , HVAC chapter
the factory service manual

Jan 18, 2015 • Suzuki Cars & Trucks

1helpful

1answer

Suzuki alto 53 plate heater blowing cold and sounds like dripping noise coming from pass foot well area,sometimes sounds like air leaking from pipe under pressure

Could be heater matrix! Is the carpet wet in that area?

Dec 07, 2014 • Suzuki Cars & Trucks

0helpful

1answer

Suzuki alto 2010 fuel cut off location

double posted and still no car spec.
i think you meant
1,061 cc (1.1 L) F10D I4 (petrol)
post symptoms,,, or buy an FSM and read how yours works.

Mar 21, 2014 • 2010 Suzuki Alto 1.0

0helpful

1answer

Suzuki alto fuel cut off switch location

why not post symptoms, and not guess at parts that may or may-not
exist.?
the fuel cut off switch is the ignition key, and works all the time.
The Maruti Alto is the Indian-built version of the fifth generation Alto
796 cc (0.8 L) F8D I3 (petrol)
998 cc (1.0 L) K10B I3 (petrol)
1,061 cc (1.1 L) F10D I4 (petrol)

or
Seventh generation (HA25) Alto from Japan.
796 cc (0.8 L) I3 (petrol)

what engine, the fuel systems vary by engine, and country sold to.
neither sated.

Mar 21, 2014 • Suzuki Alto Cars & Trucks

1helpful

1answer

Ano ang valve clearance ng suzuki f5 engine

what year.? what car.?

F5A - 543 cc (33.1 cu in) (62.0 x 60.0mm)
- 1980-1984 Suzuki Alto/Fronte SS40S/V
- 1984.09-1988.09 Suzuki Alto CA/CC71, CA/CC72
- 1980.09-1989.10 Suzuki Carry/Every ST40/41, DA/DB71
- 1982-1988 Suzuki Cervo SS40C
- 1984.09-1988.09 Suzuki Fronte CB71, CB/CD72
- 1986.01-1990.03 Suzuki Jimny JA71
- 1983-1988 Suzuki Mighty Boy SS40T
F5B - 547 cc (33.4 cu in) (65.0 x 55.0mm)
- 1988.02-1990.05 Suzuki Cervo
- 1988.10-1990.03 Suzuki Alto CL/CM/CN/CP11
- 1988.10-1989.04 Suzuki Fronte CN/CP11
- 1989.05-1990.03 Suzuki Carry/Every DA/DB41 (also labelled Autozam Scrum DG/DH41)
- 1989.10-1990.02 Autozam Carol AA5PA/AA5RA

Mar 14, 2013 • Suzuki Cars & Trucks

Question 2

Vernon Taylor

Suzuki Master 7,446 Answers
Posted on Oct 21, 2019

Vernon Taylor

Suzuki Master

Joined: Oct 05, 2008

Answers

7446

Questions

0

Helped

1959669

Points

26207

Heater resistor gets hot and so is placed at the point of greatest cool air flow in the heater unit - this is generally just before the fan.

Testimonial: "I just wanted to share a quick note and let you know that you guys do a really good job"

Answer 2 · 9/10/2009 12:00:00 AM

Anonymous

854 Answers
Posted on Sep 10, 2009

SOURCE: how do i top up gearbox oil on suzuki alto?

....

Anonymous

3 Answers
Posted on Dec 05, 2009

SOURCE: 03 Suzuki Alto - Dashboard, tail lights not working

I have this car it has huge electrical problems. Something in the computer/alternator/etc. I have no speedometer, all my internal lights are screwed up. I've had 2 alternators, a starter and 4 batteries in 2 years. Get rid of it.

Anonymous

770 Answers
Posted on Dec 13, 2009

SOURCE: My 05 Suzuki Altos heater is blowing cold, The

There is a valve on the inlet hose that is not fuctioning properly. You should be able to manually open the valve to get heat. The problem with the valve could be the valve itself, or the linkage that operates it. Good Luck! I hope you find this to be very helpful!

Marvin

85242 Answers
Posted on Feb 16, 2012

SOURCE: Electrical Wiring diagram for Suzuki Alto

We do not have wiring diagrams, sorry

Sidharth

41 Answers
Posted on Oct 17, 2012

SOURCE: grinding coming from back of suzuki alto

Get the wheel bearing and brake pads checked.

Answer 3 · 9/10/2009 12:00:00 AM

Anonymous

854 Answers
Posted on Sep 10, 2009

SOURCE: how do i top up gearbox oil on suzuki alto?

....

Answer 4 · 12/5/2009 12:00:00 AM

Anonymous

3 Answers
Posted on Dec 05, 2009

SOURCE: 03 Suzuki Alto - Dashboard, tail lights not working

I have this car it has huge electrical problems. Something in the computer/alternator/etc. I have no speedometer, all my internal lights are screwed up. I've had 2 alternators, a starter and 4 batteries in 2 years. Get rid of it.

Answer 5 · 12/13/2009 12:00:00 AM

Anonymous

770 Answers
Posted on Dec 13, 2009

SOURCE: My 05 Suzuki Altos heater is blowing cold, The

There is a valve on the inlet hose that is not fuctioning properly. You should be able to manually open the valve to get heat. The problem with the valve could be the valve itself, or the linkage that operates it. Good Luck! I hope you find this to be very helpful!

Answer 6 · 2/16/2012 12:00:00 AM

Marvin

85242 Answers
Posted on Feb 16, 2012

SOURCE: Electrical Wiring diagram for Suzuki Alto

We do not have wiring diagrams, sorry

Answer 7 · 10/17/2012 12:00:00 AM

Sidharth

41 Answers
Posted on Oct 17, 2012

SOURCE: grinding coming from back of suzuki alto

Get the wheel bearing and brake pads checked.

Related Topics:

Trustworthy Expert Solutions

Suzuki alto sz4 heater resistor location - Suzuki Cars & Trucks

1 Answer

Vernon Taylor

5 Related Answers

Anonymous

Anonymous

Anonymous

Marvin

Sidharth

Add Your Answer

Attachments: Added items

Related Questions:

Alto resistor location? Can anyone tell me where the heater resistor is located on a 2010 Alto

Front hub nut torque for suzuki alto 2009 sz4 thank you

Workshop manual suzuki alto gl 2003

CAN I HAVE A DIAGRAM OF SUZUKI F6A VACUUM HOSE CONNECTIONS?

I have s Suzuki alto gl on a 2004 plate heaters are not blowing at all changed fuse but still no luck pls help

My suzuki alto stantard SZ 5 DOOR 2012 modle heating is now working Please advise

Suzuki alto 53 plate heater blowing cold and sounds like dripping noise coming from pass foot well area,sometimes sounds like air leaking from pipe under pressure

Suzuki alto 2010 fuel cut off location

Suzuki alto fuel cut off switch location

Ano ang valve clearance ng suzuki f5 engine

Not finding what you are looking for?

Cars & Trucks

Alto resistor location? Can anyone tell me where the heater resistor is located on a 2010 Alto

Ask a Question

Check Out the Latest Top Trucks Report!

Top Suzuki Experts

ZJ Limited

Thomas Perkins

john h

Are you a Suzuki Expert? Answer questions, earn points and help others

Manuals & User Guides

Forenza OWNERS MANUAL.pdf....

Suzuki_gepkonyv.pdf. user-manual-1996...

Http://www.caaquebec.com/DocumentLibra...

Related Topics:

Trustworthy Expert Solutions

Suzuki alto sz4 heater resistor location - Suzuki Cars & Trucks

1 Answer

Vernon Taylor

5 Related Answers

Anonymous

Anonymous

Anonymous

Marvin

Sidharth

Add Your Answer

Attachments: Added items

Related Questions:

Alto resistor location? Can anyone tell me where the heater resistor is located on a 2010 Alto

Front hub nut torque for suzuki alto 2009 sz4 thank you

Workshop manual suzuki alto gl 2003

CAN I HAVE A DIAGRAM OF SUZUKI F6A VACUUM HOSE CONNECTIONS?

I have s Suzuki alto gl on a 2004 plate heaters are not blowing at all changed fuse but still no luck pls help

My suzuki alto stantard SZ 5 DOOR 2012 modle heating is now working Please advise

Suzuki alto 53 plate heater blowing cold and sounds like dripping noise coming from pass foot well area,sometimes sounds like air leaking from pipe under pressure

Suzuki alto 2010 fuel cut off location

Suzuki alto fuel cut off switch location

Ano ang valve clearance ng suzuki f5 engine

Not finding what you are looking for?

Cars & Trucks

Alto resistor location? Can anyone tell me where the heater resistor is located on a 2010 Alto

Ask a Question

Popular Questions

Central locking is not working in my Suzuki swift what can the problem be and it not the fob or key

Suzuki swift immobilizer Lock light saying on in

Suzuki Grand Vitara what does SYSTEM CHECK MEAN flashing on the radio

Transmission sensor problem

Esp hill hold disable

Check Out the Latest Top Trucks Report!

Top Suzuki Experts

ZJ Limited

Thomas Perkins

john h

Are you a Suzuki Expert? Answer questions, earn points and help others

Manuals & User Guides

Forenza OWNERS MANUAL.pdf....

Suzuki_gepkonyv.pdf. user-manual-1996...

Http://www.caaquebec.com/DocumentLibra...