You can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete.. eg. pls try reliable-store.com
You will first need to remove power to the hydraulic pump that supplies hydraulic pressure to the Cylinder that raises and lowers the outrigger. then a very heavy snap ring holds the pivot pin into the socket in which it rotates. this is a very heavy job and one best left to the professionals that have the proper tools and equipment to lift everything quickly as attempting yourself is very dangerous and costly
SOURCE: Removing a door panel on a 1988 chevy C15 truck
There should be a couple of screws on the arm rest that you need to remove and probably one on the door handle then you need to find something to pry the panel off with, without breaking the plastic clips. They make a special tool for this that you can buy for just a few dollars at any auto parts store. If attempting to do it without the right tool be careful not to break the clips.
SOURCE: passengers side rear view mirro replacement
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
SOURCE: need to remove inner rear passenger side door
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you need to pull back the weather seal and then you can access the bolts securing the outer handle
SOURCE: Need to replace passenger side rear view mirror.
on the iside of the door theres a plastic cover it just pops off so you can take off the nuts
http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-rear-view-mirror-metal.html
----------
power locks, power window and power
mirror on the passenger side not working on Ford Windstar
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
----How to Remove Outside
Mirrors on Acura Integra?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-outside-mirrors-on-acura.html
-------Passenger side
Folding Mirror is not operating?
http://schematicsdiagram.blogspot.com/2011/12/passenger-side-folding-mirror-is-not.html
--------
These will help.
Thanks.
196 views
Usually answered in minutes!
×