Question about Chevrolet Cruze
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Your trans is slipping, u are going to need to have it checked out at a trans shop, they will test drive it in most cases for free and report what they think is wrong or recommend more diagnostic work if they are unsure..
Posted on May 21, 2009
Sounds like you have a bad shift solenoid. Not sure if the Chevys are a solenoid pack, or seperate, but it will need to be replaced.
Posted on Jun 02, 2009
i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do
Posted on Jan 19, 2010
Drop the pan, odds are the shift solenoid is out, its located at the front of the trans on the driver side. I'm sure your check engine light is on that will comment about the timing/shift solenoid being bad. I had the same problem with mine. The solenoid had plastic coming out of the inside. To remove it you'll find a small C clip holding it in, just take a small screw driver and pull the clip out. The part cost me like $36 from my local dealership. And its a longer solenoid. I believe its the 3-2 downshift solenoid. I do have the part number if you need it.
Posted on Apr 25, 2010
Testimonial: "Thank you so much. I actually thought this was the problem, but i didn't know. Thanks again!! send me the part number"
Tips for a great answer:
Aug 03, 2017 | Chevrolet Malibu Cars & Trucks
Mar 15, 2016 | Cars & Trucks
Feb 03, 2016 | Cars & Trucks
Dec 30, 2015 | Cars & Trucks
Mar 02, 2014 | 2007 Chevrolet Avalanche
Oct 24, 2012 | 2004 GMC Envoy SLT
May 28, 2010 | Chevrolet Blazer Cars & Trucks
Nov 30, 2009 | 1992 Chevrolet S-10
May 05, 2009 | BMW 318 Cars & Trucks
Apr 16, 2009 | 2003 Chevrolet Silverado 1500
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: