Head Talk settings on Renaul Clio 4 900cc 2015 model

The Clio IV
we have no Renault cars here in USA after 1987 so no books.
but the service manual for this car in your secret country has it.
call your dealer, say you need the service manual, bingo !
I guess the rear axle center NUT ? is it? not lug nuts..
I'd not guess that, ever.

It is better for questions of you just use
'year make model' and then engine type.

I am looking for cylinder head bolt tightening torque specs for ...

https://mechanics.stackexchange.com > questions > i-am...
Nov 26, 2020 · 2 answers
According to this forum thread, the torque values for the OM651 engine head bolts are as follows: 1st pass - 15Nm (11 lb-ft); 2nd pass - 90° ...
Missing: cdi ‎2015

1, 3, 4, 2 with number 1 at the flywheel/gearbox end.

https://www.renaultforums.co.uk/threads/valve-head-torque-settings-clio-1-4-8v.151470/

https://www.google.com/search?source=univ&tbm=isch&q=Torque+setting+for+Renault+Clio+1.4+8valves&hl=en&sa=X&ved=2ahUKEwiugMHv1qvpAhWuyYUKHWPEBWAQsAR6BAgKEAE&biw=1326&bih=627

Torque settings for?

If you have the original handbook for the car you might find the code in there. If not you may have to take you vehicle details to a dealership. This option might cost you.
The radio can be removed more easily than you think. I'm assuming by Clio 4 you refer to the current 'new' model. Have a look at the web link below. It might help. Renault Clio 2012 Head Unit Removal Guide

It is called and Inertia switch and if your car had one it is only tripped and shuts off in a rear end collision of more than 3 G's. Your car doesn't use one.

Anon, Gasket and bolt kit can be ordered online, links below.

• Stage one 20 Nm
• Stage two, Angle tighten through 240 Degree's, plus or minus 6 degree's.

8 4 1 5 9
sequence
7 3 2 6 10
HEAD GASKET SET BOLTS CLIO MEGANE MODUS SCENIC 1 4 16V K4J 1999 05

You need liner kit with shims between head and block

you must turn the wiper control for wiper operation