Can i please have torque setting fir a 2'7 2tr engine 2007 toyota hilux mains and big ends pls

SOURCE: torque settings for big ends on a 97 toyota camry 220sei

On the V-6 it's 25 Nm (18 ft lbs) on the first pull and then you rotate the next pull 90 degrees using a torque angle wrench.

Checking the specifications for the four cylinder:
25 Nm (18 ft lbs) on first pull and 90 degrees
on the second pull using a torque angle wrench.

Michael Grey

• 365 Answers
• Posted on Jun 20, 2009

SOURCE: engine bearing torque settings big end and main bearing

4 cylinder correct?

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

SOURCE: TOYOTA HILUX 2006 engine head torque specs

it depends on the size of the screws. i recommend to set torque as 100lbs for new bolts, 90 for old bolts

SOURCE: torque specs for Mazda titan t40 & timming

You need to buy the manual for this job. There is too much info to give to do the job correctly. Basically I would have to write the manual.