P0705 Trans Range Sensor Circuit Malfunction PRNDL Input

BMW transmission range sensor position Vehicle Parts ...

www.fixya.com/tags/transmission_range_sensor_position/auto.../bmw

BMW vehicle parts & accessories transmission range sensor position related ... i got a transmission fault warninig my bmw car 545i E60 it is a 2004 E60 bmw car ...location transmission dipstick 1997 bmw 328is if its a manuel transmission it ...

P0705 Transmission Range Sensor TRS Circuit Malfunction

www.obd-codes.com/p0705

Transmission Range Sensor Circuit Malfunction (PRNDL input) ... Later models with the transmission range sensor located in the valve body are a different ball ... What causes the P0705 code on a BMW 740i ('97) ... 2004-2015 OBD-Codes.com.Missing: 545

code p0705 refers to transmission range(TR)sensor/switch--PRNDL input--circuit malfunction===causes--wiring--TR sensor/switch---ECM/TCM
I would have the TR sensor/switch checked out first and then the TCM module.

code p0705 refers to transmission range(TR) sensor/switch--PRNDL input--circuit malfunction===causes--wiring---TR sensor/switch---ECM/TCM

P0705 meaning Transmission Range Sensor Circuit Malfunction (PRNDL Input). Take it to a transmission shop to get adjusted. You don't want to fool with this yourself.

P0705 Transmission Range Sensor Circuit malfunction (PRNDL Input). It means something is wrong this sensor, take your car to a Transmission Shop to further diagnose the problem.

p0705 code is transmition range sensor fault or PRNDL input circuit malfunction (possible ecu faul)

03 Town Car transmission whines & taps on very hot days only, changed fluid filter, trans cooler & radiator. Runs great on cool on days under 90 degress.

P0705....Transmission Range Sensor Circuit Malfunction (PRNDL Input) . probably means that that a plug may have come off or a wire got cut thus the circuit to the Park , Reverse, nuetral , Drive or Low had a "malfuntion". Ot it couldbe the sensor itself on the tranny.

sounds like the trans range sensor or it could be internal trans problem. is the trans shifting ok? if not, it might need an overhaul. the sensor might be something you can tackle but it's on top of the trans right below the air filter housing. it the sensor that the shifter cable is connected to. you'll have to have it in neutral to install it as the sensor has line up marks on it.

code p 0705 refers to transmission range(TR)sensor /switch PRNDL input--circuit malfunction===causes ---wiring---TR sensor /switch---ECM/TCM ( transmission control module)
take it to an accredited transmission professional repair specialist and have it checked out
the first place I would be checking is the wiring and harness connections