Question about Suzuki Cars & Trucks
u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store
the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there
Posted on Nov 14, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
there is no dipstick stupid suzuki the only way to check trans fluid is to crawl under the car and remove the filler plug from the transmission check to make sure the fluid is to the brim of the hole there is a diagram in the manual page 5-11 hope this helps
Posted on Oct 10, 2009
there is no dip stic on the forenza no need to go to the dealer and pay for it simply jack the entire car off the ground enough to get yourself under it make sure u support it with appropriate stands. you can check the fluid by removing the plug from the side of the trans u will need a special tool for this u can get from an auto parts store after removing the plug check to make sure the fluid is right to the brim of the plug hole then turn the car on and shift through the gears R,D,1,2,4 and then back again hold in each gear for about 5 sec then turn the car off crawl back under and check again . if low add a little at a time until its filled u can get a small hand pump with a tube on it from auto store u put this in a quart of trans fluid makes the job alot easier . as for the other problem it is you Trans range sensor $65 dollars from the dealer or $45 from OEMsuzukiparts.com not very hard to change Hope this helps
Posted on Oct 11, 2009
Right on the transmission, to the right side of the engine bay as you are looking down on it. It is a black plastic part that is bolted on the transmission with two 10mm bolts, and connected to the transmission with rod and clip. It is partially obstructed by the radiator hose, but otherwise really easy to get to.
Posted on Jan 28, 2010
You do not need to "calibrate the computer" when changing the trans. range sensor. If the dealer is telling you this, it is because they want more of your money. Just buy the sensor.
Posted on Feb 15, 2010
Tips for a great answer:
Nov 21, 2016 | Suzuki Cars & Trucks
Oct 11, 2011 | 2006 Suzuki Forenza
Sep 23, 2011 | Suzuki Forenza Cars & Trucks
Jul 14, 2011 | 2006 Suzuki Forenza
Dec 08, 2009 | 2006 Suzuki Forenza
Dec 05, 2009 | 2006 Suzuki Forenza
Nov 16, 2009 | 2006 Suzuki Forenza
Sep 28, 2009 | 2006 Suzuki Forenza
Sep 26, 2009 | 2006 Suzuki Forenza
Jan 23, 2018 | 2006 Suzuki Forenza
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: