1997 ford expedition eddie bauer, replaced neutral safty solenoid in the steering column. Now it wont start was starting before. What could I check to find the reason for no start no crank?

Christophe Thompson

• 1224 Answers
• Posted on Jun 10, 2008

SOURCE: 2004 eddie bauer expedition problem

bad battery with dead cell
dead cells wont be seen on battery test
or alternator not functioning properly
you left your lights on somewhere in vehicle or connected to this a defective door switch when doors closed leaves lights on

SOURCE: diagram bypass heater cord on 2001 ford expedition eddie bauer

the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply

Bill

• 424 Answers
• Posted on Oct 08, 2009

SOURCE: i have 98 eddie bauer ford explorer with headlight problems

The headlamp switch will cause the lamps to turn off. The switch heats up and turns the headlamps off. It will cool down and work for about 10 minutes and cut out,

Jon Adamson

• 167 Answers
• Posted on Oct 25, 2009

SOURCE: Location of Shift Solenoid in 1999 Ford Expedition Eddie Bauer?

They are round "cans" with wires attached. You should have SSA, SSB, SSC, Torque converter and Pressure Control solenoids. They control pressures and have no mechanical linkage.

SOURCE: Heated seats not working.

You should start by checking your fuses under the dash. Should be a small panel under the dash or on the side of it. The panel has a legend which shows the position and title of each fuse.