First, the instructions of the removal of the Intake Manifold. Second, reinstall procedure, tightening of the bolts. Torque specs, measurement. I really do need the help, please.
SOURCE: specs on upper intake
Hi e-mail me at [email protected] There is a sequence for this. I can e-mail you the picture of the sequence and the tourqe spec.
SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC
I have the specs and diagrams. If you want me to send them to you, give me your email address. [email protected]
SOURCE: need head bolt, intake manifold, and exhaust torque specs
Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks
SOURCE: What is the torque spes
For 2004 Chevrolet Truck Silverado 2500HD 4WD 6.0L SFI 8cyl, the intake manifold, throttle body, fuel injection rail, and fuel
injectors may be removed as an assembly. If not servicing the individual
components, remove the manifold as a complete assembly.
Intake manifold bolts. Tighten intake manifold bolts first pass in
sequence to 44 inch lbs. (5 Nm). Tighten intake manifold bolts final
pass in sequence to 89 inch lbs. (10 Nm).
Fig. Lower intake manifold bolt tightening sequence - 4.8L, 5.3L and 6.0L engines
Hope this helps.
SOURCE: broken intake manifold bolt 2004 escape
Remove the manifold and send it out to a machine shop, they can remove repair this broken bolt. Cost about $50.00
602 views
Usually answered in minutes!
×