It's probably your scanner, but you might want to check power and ground at the DLC. Use this pic it's universal.
SOURCE: seat belt alarm goes off when belt is buckled
try relapsing the switch inside the female of the seat belt
SOURCE: My rear seatbelt in my subaru outback is locked and wont pull out to buckle up. Can it be fixed
I assume you've already worked the seat belt end back and forth with force. Did the belt move at all? Did you remove the rear seat bottom cusion from the car? That will give you additional leverage on the belt.
If the belt twisted the last time it was used and then rolled up, you need to go to the dealer or an upholstery shop for help.
SOURCE: '10 Corolla; seatbelt alarm problem
there is a switch under the seat feel arround under the seat and look for wires follow them up and down and find the plug it is likely near the carpet
Testimonial: "Thanks so much for the help. I would have never found out how to do it without your directions. :-)"
SOURCE: Our 2001 ford focus when it idles it surges
Check the pcv hose for leaks at the intake manifold. Common problem.
SOURCE: Factory alarm has cut off the motor
Order and program a new remote.http://www.programyourremote.com/
56 views
Usually answered in minutes!
×