Valve timing for ford escort 1.1 mk2 - Ford Cars & Trucks

6ya staff

• 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

SOURCE: Escort Mk2 1600 valve and torques settings what are they

cylinder bolt torque settings stage 1 15 ft pounds
stage 2 50 ft pounds
stage 3 85 ft pounds

valve clearences 0.15 - 0.20mm inlet
0.22 - 0.27mm exhaust
these are the figures i have been supplied with, you can also use

cylinder bolts stage 1 10 ft pounds
stage 2 50 ft pounds
stage 3 + 90deg.
with my exp, i would use the first guide as the degree method has a tendancy to snap head bolts, especially on older vehicles.

Posted on May 14, 2009

SOURCE: I would like a handbook for a Ford Escort Mk2 1.6

Try eBay....now and then something like that comes up. I don't know of any company that reprints old owners manuals.

Posted on Jul 10, 2009

SOURCE: bent valves 2000 Ford Escort ZX2

a couple bent valves shouldnt be more then a few hundred dollars to have replacedand can be fixed yes, but also the vehicle has to have another timing chain ooput on and be retimed this will probably be a total cost of somewhere in the $800 dollar range (this is only an estimate!!) to replace your entire engine would cost substantially more and in all realit i would try to sell the opother vehicle for parts, trade in, or as a whole and buy another vehicle before i invested the money into a new engine for this particular car

Posted on Sep 05, 2009

SOURCE: 98 Ford Escort zx2 2.0L 4 cyl 5 speed transmission PVC Valve

LOOK ON INTAKE AROUND AIR FILTER HOUSING AND VALVE COVER.

Posted on Apr 15, 2010

SOURCE: How do I find TDC through the #1 cyl spark plug

Probably the safest way I can think of is to use a plastic drinking straw. Place it in the spark plug hole (best done when you can see the piston) and rotate the crankshaft slowly by hand. When the straw stops rising you are at TDC. It is better done with a dial indicator but most people don't have one. There are at least three other ways to do this but this is the easiest and safest.

Posted on May 29, 2010