I was riding along in the engine just stopped on my 2003 Ford Explorer XLT nothing turn the key and no power transmitted transmitted over to the starter get earned for tried some relay switches and 50 amps for fine the put ignition switch on nothing I'm thinking maybe it could be the alternator or that crankshaft sensor what
First check all fuses next clean the battery cables and power disribution box cable and lug next go to the engine ground and the starter cables and clean them while under the truck inspect the braided cable that comes from the solenoid to the starter case in the front if that cable/wire is broken you lost the ground connections for the starter and the engine died because of the open circuit if all is well the possibly the starter just went inside the armature or solenoid did you check battery voltage it should be around 13.5 if it's good then you can rule out that and the alternator this is strictly a starting issue from what you said in your post
SOURCE: H2 Hummer
Today 11-12-08 my 2003 H2 Hummer would not start. Checked battery it ischarged. Cables tight. Tried to start with portable booster pak. No go. Tridto jump start with my wife's Suburban. Still no go.
When I turn the switch I hear a single click and that is it. No engine turning over. While trying to start with key the headlights go out. Out of ideas, Will take to Chevy garage in am. Will post solution.
SOURCE: wont start
There's only 2 more things that I can think of, check the fuse for the ignition, then the computor itself, you did everything else.It might be the problem and may not.
SOURCE: F150 ford truck 1990 key wont turn over engine new ign. switch
we have 1998 ford f15 we replaced the ignition and it still wont start the truck,, the key turns over now and the radio and everything comes on but it wont start, what is wrong???
SOURCE: 2003 Ford Explorer XLT, three windows stopped working.
For all types of power window problem and power windows not
working,i suggest you to go through the help links given below. Click the link
to go through its procedure to troubleshoot the problem :------ Power window problem Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html power locks, power window and power mirror not working? Complete Diagnosis & Testing Power Windows?
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------
---------
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html
-------------
http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks
For all types of power window problem and power windows not
working,i suggest you to go through the help links given below. Click the link
to go through its procedure to troubleshoot the problem :------
Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------
Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------
power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html
-------------
Complete Diagnosis & Testing Power Windows?
http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks
52 views
Usually answered in minutes!
×