SOURCE: Replacing front wheel bearing
The brake rotor needs to be removed, drive shaft nut in center of hub then 3 bolts hold the hub assembly to spindle from back side. if it has abs unplug it then some work will need to be done with a hammer and chisel to work the bearing out of spindle and axle shaft from bearing
SOURCE: How do you replace the front wheel bearings on a
i just replaced mine! got them off ebay both for a hundred. its the whole hub,its easy!
SOURCE: cant free the mounting bolts on a 95 buick lesabre
THE HUB BEARING BOLTS ARE 75 FT LBS. USE SOME PENETRATING OIL LIKE WD40 OR CRC PENETRATING OIL.ALSO USE 1/2 RATCHET WRENCH.YOU CAN GET MORE LEVERAGE MORE LOOSEN POWER.LET ME KNOW HOW IT GOES.
SOURCE: I have a 2001 buick regal, I need the rear wheel
The specs.for the rear hub bearing is 55 ft.lbs.
SOURCE: how to replace front wheel bearing on 2001 buick
The bearings on a LeSabre are part of the hub assembly. The hub and bearing will have to be replaced as a unit. To do this you'll need to raise the car, remove the wheel, remove the caliper guide bolts, lift and support the caliper-I use a bent metal clothes hangar to support. Do not loosen the brake line. Slide the brake rotor off the lugs. Disconnect the electrical connector for the antilock brake system. The connector is behind the wheel. Then remove the four bolts holding the hub assembly. The bolts are behind the wheel. Be sure to hold the hub while removing. To install reverse the order. Be sure to check and tighten bolts to specifications when reassembling.
903 views
Usually answered in minutes!
×