Have u tried some help book? Or google? Or there's this website big-manuals .com
Try either
Partstore will tell u..its all on computr
Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry cheap and mine
I got free in offers
3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins
there is one website more but i don't remember its name it was 2 years back bitman something link this
Try these out brother
Hey Nortell
Check one of these...
https://www.amazon.com/s?i=automotive&rh=n%3A15724561&_encoding=UTF8&vehicle=2006-21-109-191---------4948--3&ref=au_pf_dp_lf_ladp_1_3
SOURCE: 2002 Kia Spectra Transmission Fluid Check
located on driverside below the fuse box close to the firewal
SOURCE: 2003 kia spectra check engine code p0604
I have bad news for you
p0604 is a transmission control module
check the connection at the transmission control module if there are no connection issues than you will need to replace the transmission controll module "tcm" there is no other test for that code.
good luck
[email protected]
SOURCE: How do you replace a Drivers side headlight bulb 2006 kia spectra
Helps to remove the battery, but small ahbds can do it.
Directly behind the lens is a big round cap ... twist it off. The bulb is held in place with a spring that locks in to a notch in the holder. When handling the new bulb, don't touch the glass. The oil from your skin will cause it to shatter when turned on.
SOURCE: 2006 Kia Spectra 5 rear brake disc replacement
One side,turns right,and push in slightly,and the other side turns left,to retract.
SOURCE: 2006 Kia Spectra 5 rear brake disc replacement
you need a special tool avalable at most parts stores. its a disc brake piston turning tool. you have to rotate piston clockwise while pushing in on piston. you can fabricate something that enguages the slots and push and turn till all the way in.make sure to note position of slots and put them in same place as was before or the pin on the pads wont enguage the slot
133 views
Usually answered in minutes!
×