2008 Dodge Grand Caravan fob, valet key and panic button not working. How do I fix it?

SOURCE: program second key fob

Your key can only be programed at the dealer. They have to use a scan tool and a unique id code that they get from the factory. It is done this way to help insure that the vehicle is less likely to be stolden.

SOURCE: 2005-2007 Dodge Grand Caravans

Yes, it should be able to be reprogrammed to the 06

SOURCE: 2008 Grand Caravan won't start. The lock/unlock

I am having this same issue with my 2008 Dodge Grand Caravan , I had it towed to the local Dodge Dealership. They just told me that it is the Wireless Control Module and it is going to cost $461.00 to replace it.

SOURCE: 2008 Dodge Grand Caravan and the key won't turn

If all else fails try disconnecting the battery for 30secs or so... It worked for us!! Saved big$$ on towing it in and the dealerships doing the same thing..

Marvin

• 85242 Answers
• Posted on Jul 02, 2012

SOURCE: KEY FOB

ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.

Click here to find a Locksmith in your area to program this remote.
1. Enter your vehicle and close all doors.

2. Fasten your seat belt ( fastening the seat belt will cancel any chiming that may
confuse you during this programming procedure.)

3. Place key into the ignition.

4. Turn the ignition to the ON position ( DO NOT START THE ENGINE )

5. Press and hold the UNLOCK button on a working remote.

6. Continue to hold the UNLOCK button, wait at least 4 seconds, but no longer than
10 seconds, then press and hold PANIC button.

7. When a single chime is heard, release both buttons. The chime indicates the system
is in program mode.

8. Press and release both the LOCK and UNLOCK buttons, simultaneoulsly on the remote
to be programmed.

9. A single chime will be heard. The chime indicates the the remote was recognized.

10. Within 4 seconds of hearing the chime, press and release any button on the remote
being programmed.

11. A single chime will be heard The chime indicates the remote has been programmed.

12. Repeat steps 8 to 11 for a total of 4 remotes.

13. Turn the ignition to the OFF position or wait 60 seconds to exit program mode.