- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Becker Radio Code If the display shows CODE WAIT then the car radio is probably blocked by too many incorrect entries. You can re-enter the code after leaving the device simply up to 3 hours with ignition ON !
- BUT:
if you DON'T know the code then you need to pay for a decoding service on eBay....
(I do hope you are the legal owner of the radio)
Contact the Mercedes Dealership and give them the vin for your car. The radio code will show up on the 'VMI' They may ask you to drive the vehicle in to show proof of ownership but they should get the radio working again for you at no charge. Do not just enter random numbers or you will lock the radio and may have to wait up to 1 hour for it to unlock so that the radio code can be entered again.
Regretfully due to reasons of theft or piracy we do not pass the radio codes here at FixYa. If you contact your local Mercedes-Benz dealer they will give you the 5 digit code. (You must have your registration and know the complete serial number of the radio)
AR82.60-P-7502-01A Coding Radio (MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)
If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
The code number for the radio is advised to you on the enclosed CODE CARD.
To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.
AR82.60-P-7502-01B Coding Radio (MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)
If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
The code number for the radio is given on the enclosed CODE CARD.
Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.
hi... These becker radios can be difficult if the wrong codes are entered( i think if u enter 3 times in a row) and it goes into security lock.... if you enter code and it does not work remove radio and get serial number of and call dealer. The way you enter 4 digit code is by entering the number with the station program keys on the top of the face plate ,, then after code is entered you press the * symbol and it should start working. There is a becker web site that can also assist you with radio problems it is www.beckerautosound.com . hope this solution will solve ur problem
These becker radios can be difficult if the wrong codes are entered( i think if u enter 3 times in a row) and it goes into security lock.... if you enter code and it does not work remove radio and get serial number of and call dealer. The way you enter 4 digit code is by entering the number with the station program keys on the top of the face plate ,, then after code is entered you press the * symbol and it should start working. There is a becker web site that can also assist you with radio problems it is www.beckerautosound.com . hope this solution will solve ur problem
×