Radiator drain plug location 2008 dodge avenger

SOURCE: Location of radiation drain plug

bottom passanger side

SOURCE: where is the oil drain plug in my 2008 Dodge

it will be at the lowest point of the oil pan

SOURCE: where are the spark plugs located in a 2008 dodge

They screw into the engine block. Open the hood and look for wires going to the block. Pull one wire away from the engine block. Below, is the spark plug.

Dan Doherty

• 1099 Answers
• Posted on Jan 13, 2010

SOURCE: I cant get the radiator plug out of my 2008 dodge

some are anti clockwise,,, just check

SOURCE: 2008 dodge avenger spark plug location and socket size.

• 2008+ Dodge Avenger 2.4L 4cyl.
• Remove plastic cover on top of engine, just pull on each corner for it is friction fit.
• Once removed you will see 4 black spark plug covers with one hex type screw holding each.
• Remove Hex screw and place aside, pull upward to remove plug boot from plug.
• To remove the plug, use a 5/8 socket with a 6" extension. Once plug has been turned out all the way and you cannot get the plug up and out of the hole, just press the plug boot back on the plug and pull it back up.
• Gap and replace 4 plugs with the same or equavalent type,. Drop plug down the hole and use socket to align and tighten until just snug, then torque to manufactures specifications.