SOURCE: 98 isuzu rodeo 4wheel drive wont egage light on dash blinking
is it because your not at a stop?
SOURCE: Dash Lights 1995 Isuzu Rodeo
with lights off and battery disconnected remove the twist knob on the dash that brighten and dims your dash lights and jump the two prongs with a jumper wire. connect battery and turn lights on all your dash lights should work now. if thay don't take the dash screws out and replace the bulbs, it's really easy if you have mechanical skills if not consult a friend that does. now you know the dash light dimmer switch is bad and they are hard to find i found mine in a wreck but until i did i just left the jumper wire in place (about a year and 1/2)
SOURCE: 97 Ford E250 Running lights and dash lights not working
best bet is get a WIRING DIAGRAM. you should have current (12 volts) on both sides of the fuse that works the tailights.if not there is probably a broken wire or a shorted wire leading up to the fuse. you kinda need the wiring diagram so u can see in which order the current "flows" which will help point u in the right direction.
SOURCE: 2004 Blazer Dome lights, dash lights and headlamps with flicker
bad ground at battery or chase.
SOURCE: FIring Order of a 2004 Isuzu Rodeo 3.2L Engine
My apologies for the delay....Due to the bad economy the number of questions posted has skyrocketed 50% in the last 4-months.
For 2WD and 4WD it is the same:
For 3.2L:
Firing Order:
1-2-3-4-5-6
Cylinders:
5-------6
3-------4
1-------2
(front of vehicle)
Coil is on the Spark Plug
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!
212 views
Usually answered in minutes!
×