Question about Cars & Trucks

1 Answer

How can i timing ld23 without markes on the belt

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 6,084 Answers

If there are no static marks and there should be marks on the belt, the correct replacement belt will have marks.

If the marks have been lost and sourcing a correct replacement belt is not an option it will be necessary to set the engine as per the valve timing figures found in the engine technical data section of most repair manuals and data books.
It means some tricky work but it is a very accurate way around the problem.

Posted on Jan 29, 2020

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1994 Toyota corolla changed the timing belt tensioner. trying to set timing, all marks line up except camshaft dots, can't get them to face each other without throwing off all the other marks


If you removed the tensioner and didn't lock the cams and crank down then you have to re-time the engine. It sounds like you let the exhaust and intake cams move.

Remove the spark plugs, put a ratchet on the crank pulley, slowly rotate engine until the cams line up. Once the cams are lined up remove, the timing belt and bring the crank around to the timing mark. put belt back on and let the tensioner go. put plugs back in...see if it'll start.

Apr 05, 2017 | 1994 Toyota Corolla

1 Answer

Engine Timing marks on a 4.0 ford ranger on a 2005


Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/ernie_b93ee48ba0eab50b

Nov 02, 2011 | 2005 Ford Ranger

1 Answer

Need timing blet diagram 1992 ford ranger 2.3


Hi, the crankshaft marks are on the belt pulley and timing cover, so you have to mate it up to see them. The cam sprocket mark goes on the bottom, and aligns with another mark on the timing cover. There is a plug you pull out and hole to look thru to align the cam sprocket/shaft.


jturcotte_1801.gif


jturcotte_1802.gif


Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

Jun 01, 2011 | Ford Ranger Cars & Trucks

1 Answer

How do you set the timming on a 2.3 when your putting the new timming belt on


The IGNITION timing on your Ranger is computer-controlled and is not adjustable.


Should the camshaft drive belt/timing belt jump timing by a tooth or two, the engine could still run; but very poorly. To visually check for correct timing of the crankshaft, auxiliary shaft, and the camshaft follow this procedure:
There is an access plug provided in the cam drive belt cover so that the camshaft timing cam be checked without moving the drive belt cover.
  1. Remove the access plug.
  2. Turn the crankshaft until the timing marks on the crankshaft indicate TDC.
  3. Make sure that the timing mark on the camshaft drive sprocket is aligned with the pointer on the inner belt cover.

Never turn the crankshaft of any of the overhead cam engines in the opposite direction of normal rotation. Backward rotation of the crankshaft may cause the timing belt to slip and alter the timing.
REMOVAL & INSTALLATION

See Figures 1, 2 and 3


0996b43f80211842.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Timing belt cover on the 2.3L and 2.5L engine


0996b43f80211843.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Timing belt assembly on the 2.3L and 2.5L engine


0996b43f80211844.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: Releasing the timing belt tensioner using a special tool

  1. Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned on the camshaft and crankshaft pulleys. An access plug is provided in the cam belt cover so that the camshaft timing can be checked without removal of the cover or any other parts. Set the crankshaft to TDC by aligning the timing mark on the crank pulley with the TDC mark on the belt cover. Look through the access hole in the belt cover to make sure that the timing mark on the cam drive sprocket is lined up with the pointer on the inner belt cover.

Always turn the engine in the normal direction of rotation. Backward rotation may cause the timing belt to jump time, due to the arrangement of the belt tensioner.
  1. Drain cooling system. Remove the upper radiator hose as necessary. Remove the fan blade and water pump pulley bolts.


Dec 11, 2010 | 1995 Ford Ranger Supercab

1 Answer

Hi. i am really need help, i have just take out the timing Belt on my 1987 Toyota Camry then i replaced a new Belt and the Car would not started and i think maybe i set wrong timing belt because i forgot...


Don't crank that engine over is the first thing you do. Take out th eplugs and turn the engine by hand to it's marks. Take the belt off, check it for marks, yes, no? If no, how about the old one? Does it have marks on it? Match them up to the new one. and make marks, , turn the left cam over to it's mark, does it have two? Turn the other side over to it's mark. put the belt on, crank mark on the crank mark, cam marks on the cam marks, don't line up? It should, If the engine hits the valves, you will have to turn the cams at the same time by hand so they don't hit, don't force anything, if you get the belt on there without moving the engine, spin it around a couple times to make sure it stays on it's marks. I hope you didn't do any damage already by trying to start it. Hope this helps.

Sep 17, 2010 | 1987 Toyota Camry

1 Answer

I have a 1993 subaru impreza 4 door L sedan with


mcdevito75 here, You"ll have to manually turn the camshaft gear and other gears to re align the marks, use the starter to align the crankshaft marks. Of course you"ll need the shop manual to show you these marks. Worse case, have the car towed to you local shop for repair.

Jun 17, 2010 | 1993 Subaru Impreza

1 Answer

Reset timing


timing shift on engine with timing belt are usually caused by worn timing belt teeth and resetting it is usually done by changing the belt. on new car there is no more timing adjustment the computer does all the required change. it is a must that the white mark on the new belt are aligned with each of the gear mark.

Aug 21, 2009 | 2003 Mazda Protege

1 Answer

Timming without marks on belt how to set


Get a new belt with marks on it. They're 25 bucks. easy fix. Next time mark it b/4 you take it off.

May 08, 2009 | 1992 Toyota Camry V6

2 Answers

Timing belt alignment


A factory service manual would help, but I'm assuming that if you had one, you probably wouldn't be on this site.

To set the timing, you need to first perform the obvious: remove the accessory drive belts, cam pulley covers, and engine fan and hub. Next you'll need to rotate the engine by hand until the timing marks on the camshaft sprockets and crankshaft are aligned with their corresponding stationary marks. The 0 degree mark on the lower timing belt cover is the timing mark for the crankshaft pulley. There is a mark (small, vertical formed indentation) for the left camshaft pulley on the backing plate behind the pulley near the 1 o` clock position. The same mark exists for the right camshaft pulley only it is on the backing plate near the 8 o`clock position (making it difficult to see). With the crankshaft placed at the zero mark, you can observed where the timing discrepancy exists.

(TIP: Once the right camshaft timing is properly lined up, etch an additional mark on the pulley's face and the backing plate at the 12 o`clock position. This will make it easier to align the pulley for furture adjustments and repairs)

To set the timing correctly, move the crankshaft pulley to 12 deg. BTDC. Being careful to not disturb the position of the crankshaft once it has been moved to that position, remove the crankshaft pulley, lower timing belt cover, timing belt tensioner, and timing belt. Compress the timing belt tensioner and if the original ring pin isn't available to retain the tensioner a small allen wrench can be used to achieve the same results. Line up both camshaft marks and reinstall the timing belt and timing belt tensioner (do not remove the timing belt tensioner tool used to maintain the tensioner piston in a compressed position). When installing the timing belt, be sure to allow the least amount of slack to exisit between the left camshaft pulley and the crankshaft sprocket, but without moving the pulleys.

Next, remove the timing belt tensioner piston retention tool and mount the lower timing belt cover and crankshaft pulley (without fully installing them). Rotate the crankshaft pulley to the 0 deg. mark. If done correctly, moving the crankshaft pulley from 12 deg. BTDC to 0 deg. will remove all remaining slack from the timing belt assembly and the camshaft pulleys and crankshaft pulleys will be lined up with their corresponding marks. Once proper timing has been achieved, install all removed parts.

(Another TIP: I hope it's not necessary, but in case it is, I'll remind you that proper torque of all bolts are necessary as this is an all aluminum engine. Stripping out bolts holes due to over-tightening bolts occurs very easily and become very annoying to deal with [e.g. alternator belts not being able to be tightened completely and constantly squealing every few days, etc.])

Apr 26, 2009 | 1997 Isuzu Rodeo

1 Answer

1998 xc70 volvo timing marks


fFirst of all you must replace the timing belt with new. The second problem you have is it sounds as if you have not set the engine, to the correct position before you removed the belt, it is very difficult to set the marks without everything moving together. If you move one camshaft without the other one moving in unison you will bend valves. I also need an engine code for the correct timing marks. as there are 2 options for this vehicle. It may be cost effective at this stage to employ a good technician to finish the job for you. But if you can give me the engine code i will send the info.

Dec 24, 2008 | 2006 Volvo XC70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...