18436572
SOURCE: Car will not downshift upon acceleration..."kickdown"
Most affordable possible solution is to give it a transmission tune-up. Transmission number one problem is neglect. Change the oil, filter and pan gasket. You'll probably need to take the pan off, very messy job. Take the pan off, carefully scrape all old gasket material, clean the pan with dish washing soap, dry it completely, put a bottle of Lucas for transmission in the pan. Put some Indian Head Gasket Shellac Compound on the pan gasket surface. Set the gasket on the pan, keep the gasket on the pan for three minutes then install. Don't put any Shellac on the transmission gasket surface nor on the gasket. Follow recommended directions for filling the transmission with oil.
SOURCE: Need the firing order for a 2004 Cadillac v8
This should be the firing order;
2004 Northstar RWD/AWD 4.6L V8 (LH2) ... Firing Order: 1-2-7-3-4-5-6-8
Please be sure that when you list your questions on auto's be more precise on info provided. Sometimes listing the Vin Engine number helps to to locate info. Good Luck!
Testimonial: "Excellent response time"
SOURCE: I want to drain the radiator on a 2000 Cadillac
Lay under front of car and look under the radiator. The radiator support/header panel should have a hole in it look up in hole the petcock should be hiding in there. DO NOT LAY UNDER THE CAR WITHOUT THE E_BRAKE ON, please.
Testimonial: "I was able to go right to it with the clear and consice direction you gave me!!"
SOURCE: where is cylinder #1 on a Cadillac V6 engine 3.6
Right bank is 1,3,5.and left bank is 2,4,6.Hope this helps.Good luck.
SOURCE: torque specs for cylinder heads 4.9 v8 engine (NOT
Fig. Cylinder head torque sequence-4.5L and 4.9L engines (not Nothstar, this is 4.6L)
Hope this helps (remember rated).
Note: The firing order above is that of a GM northstar block and must be changed for SBC applications, see below
Crankshaft Position sensors
1,021 views
Usually answered in minutes!
×