At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P0011 Nissan
See the error code p0011. it indicates the engine control module has determined that the bank 1 intake camshaft is more advanced than what the engine control module has commanded it to be.
Jul 23, 2021
These codes have to do with the CVVT(continuously variable valve timing)solenoid. I guess it is a 2.4 liter engine, the solenoid is located right above the power steering pump at the #1 cylinder in the cylinder head. If it is the 3.5 liter it is located on top of each cylinder and is accessed after the intake plenum is removed. Either way, the solenoid controls valve timing of the exhaust cam via the solenoid which uses oil pressure to advance or retard the timing. The first step is to verify proper weight of oil and level. If the engine is over due for service, get it done. If the oil is not an issue, then the solenoid is becoming sluggish in advancing or retarding the camshaft and should be replaced.
Well p0011 is a code for your camshaft position bank #1 so it could be the sensor or something more but i would start with a bank #1 camshaft position sensor
OK check the CMP sensor connector for cleanliness, sometimes oil can get in and disrupt the signal transmission to the ECU. Check the wire loom continuity all the way back from the CMP to the ECU. If the error code persists remove the cam sensor, clean its tip of any debris and refit.
×