Question about 1994 Chevrolet Lumina APV

1 Answer

1994 Chevy Lumina ATV power window and locks problem.

1994 Chevy Lumina ATV, the passenger side power window stopped working, able to operate it fine bypassing the switch with a direct power jumper from the battery and it travels faster than before the switch stopped working. Driver's side now very slow and will not fully close the window before it stops. If you wait a few moments it will travel further. We have to repeat several times until it fully closes. Also the power locks will not fully lock unless the switch is pressed 2-3 times. Almost acts like there is not enough voltage, like the battery is going dead but these symptoms are the same with or without the engine running. Ideas?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Sounds like high resistance in the switch or a connector

Posted on Sep 20, 2009

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix rear window switch/motor?


The switch could be defective. All window power comes from circuit breaker 2 in the fuse block so obviously the other windows work OK. You can bypass the switch and apply power directly to the window motor to check operation.

Jul 13, 2014 | 1995 Chrysler LeBaron

1 Answer

Why doesn't my 2000 chevy blazer power windows and door locks and remote mirror doesnt work. Power window on passenger side does work


well, the first thing is to check the fuses and or relay for power windows.should be listed in your owners manual. if ok, then remove switch from drivers side window and check for power. if power to the switch then use a jumper wire from power side to motor side of switch. if window works then its the switch causing the problem. Good-day!

May 04, 2014 | 2000 Chevrolet Blazer

1 Answer

I have a 2004 Chevy Venture. All if a duffin my passenger side window stopped working. It will not operate from either side. Also the for lock button does not work on that side but the driver side button...


It could be a short in the harness between the door and the body.
Or it could be a problem with the switch in the door, but I doubt it.
You would need to get a wiring diagram and a meter or test light and find out which wires are hot and which are not to troubleshoot it.

Oct 01, 2012 | Cars & Trucks

2 Answers

1997 Chevy Lumina, I replaced the passenger side power window motor due to the factory one failing, The person before me cut all the wires going to the motor and toggle switch in their attempts to fix /...


There is a wiring harness on hinge side of passenger door correct, take a look at the wiring colors. Hope you can read it. At the window switch, the outside wire on either side is voltage or ground depending on which direction, up or down, reversing motor. You don't need the window switch for testing, you should be able to operate from driver door master switch. If you get the wires reversed, the only thing that will happen is, up will be down and down will be up, if that happens, reverse the wires. Just my opinion.
At the window switch, top middle wire is lockout, so only the driver can operate the windows.
power window-jlrraf3b1gxaofzrmafkiszu-5-0.jpg

Apr 26, 2017 | 1997 Chevrolet Lumina

1 Answer

Passenger side automatic window switch is not working in my 2004 Chevy Aveo. The window is operational from the driver's side master switch but not the passenger side. Im thinking its a fuse or a relay,...


Make sure the window lockout button is not depressed on the master window switch. This will turn off the other switches and not let them control there respective windows.

Power is supplied to all the windows from one fuse and one relay. So if the master switch operates the window than we know the fuses and relays are o.k. We know the master switch will operate the window so that tells us the window motor and ground side of the passenger window motor circuit are also good.

Which leaves us with a bad switch or no power to the switch. The passenger window switch gets its power to operate independently from the master switch window lockout button. When the button is off power is supplied to the passenger switch and allows the passenger to operate the window themselves.

The only thing you need to do is check for power at the passenger switch on the brown wire with orange stripe. If there is power there then you have a bad switch.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Oct 08, 2010 | Chevrolet Aveo Cars & Trucks

1 Answer

2006 Chevy Impala power windows won't work


It does sound like you have a short in the master switch on the drivers side. If the passengers switch does not work, check the left master switch and the window lock switch.

Jul 19, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

98 chevy blazer power window issue


sugest fuse ck 1st thing. Master bypasses individual controls. Power supply to rear windows is interupted. Ck for connevtor under front seats. Fuse may be labrled accessory or per win.

May 12, 2009 | 1998 Chevrolet Blazer

3 Answers

Brake light problems on a 2000 chevy lumina


Will your Center High-Mount Stop Light (CHMSL) illuminate when you depress the brake pedal, but the lower/outer lights will not?
-- Do you have to hold the signal lever in a certain spot to get the turn signals to flash?
-- Do you have to hold the signal lever in a certain spot to get the lower/outer brake lights to illuminate?
-- Will the signals work in one direction, but not the other?
If you answered yes to any of the preceeding questions, your turn signal switch is likely malfunctioning.

**One more question before we continue: Is the turn signal lever not "cancelling" (returning to the "off" position) after you make a turn? If this is the case, you have a broken "cancelling spring."


Before you begin disassembly of your steering column, verify the turn signal flasher is not malfunctioning. If your brake lights work fine, but not the signals (either direction,) then it's likely the flasher is burnt out. The flasher itself is located underneath the dash near where the steering column passes through the firewall

Mar 19, 2009 | 2000 Chevrolet Lumina

2 Answers

Passenger window on 94 lumina van


If all the other windows work when the passenger window won't move (during the 5 min period), then the passenger side motor is bad. If the motor pulls too much amperage, the circuit breaker that is built into the motor will trip, until it cools down.

Mar 08, 2009 | 1994 Chevrolet Lumina APV

Not finding what you are looking for?
1994 Chevrolet Lumina APV Logo

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...