SOURCE: 2002 Dodge Ram 1500 5.9L quad cab
there will be a bolt in the center of the pulley and it will need to be removed and you will need a puller to remov the pulley. the pulley needs to come off evenly or it will bind, this i why you need thepuller, you should be able to get a cheap one for about $ 25.00 . when you go to get one tell them at the store what you need the puller for so you get the correct one. this puller is also good for removing steering wheels.
How ever the timing chain cover seal should not have water coming out of it. it sounds more like a head gasket or a frost plug.
SOURCE: 2000 dodge ram 1500 speed sensor location
Hi my name is Allen!
The sensor you are looking for is located in the rear diff housing, its mounts on top of the housing it is also used for ABS if equipped.
For further asistance you may reach me through FixYa!
SOURCE: 2004 dodge ram 1500 rear brake light out how to replace?
Open up the tail gate, you will see two torque screws on the inside beside the tail lights. take these out, this will free up the housing and you can change it from there.
SOURCE: Broken rear slideing glass window on a dodge dakota 2001.
on this truck the rear window is glued in with urethane, if I was cutting it out I would use a special power tool designed to do this. I am sorry but this will not be easy with out it, the only thing I could see is you bending and cut the frame off with a scraper and hammer. (bad picture in my mind) might be worth a stop at an auto glass shop and ask them to remove.
SOURCE: removing/installing 2000 dodge grand caravan window glass
after u remove the bolts that hold it to the window regulator tip the window towards the front of the door and the top rear corner of the window should pop out and then u just lift hte window out,hope this helps
Testimonial: "Thank you!"
639 views
Usually answered in minutes!
×