1990 Chrysler New Yorker Logo
Posted on Oct 06, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have a 1990 Chrysler New Yorker. The turn signals don't work. When I turn on the hazard lights they work. I believe it is the relay fuse for the turn signals. The one I cant find is not located in fuse box inside the glove box or the fuse box in the engine compartment. The owners manual says there is a third fuse box "located near the fuse block at the right lower corner of the instrument panel." I can't find it. I'm starting to think it does not exist.

  • Mike Paster Oct 08, 2009

    It was the flasher I Had to take out the glove box to find where it was. You have to take out the glove box. it's above it, you can not access the flashers without doing so.

×

2 Answers

earl bailey

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Nov 14, 2012
earl bailey
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Sep 28, 2012
Answers
2
Questions
0
Helped
782
Points
4

The other fuse box id behind the fuse box in the glove box i had same problem

Rich Norman

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chrysler Master 502 Answers
  • Posted on Oct 06, 2009
Rich  Norman
Chrysler Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 15, 2009
Answers
502
Questions
0
Helped
221819
Points
1628

If the lights work with the hazards, your problem is not a fuse. You need what is called a multifunction switch. It is the switch that the directional arm goes into. It can be difficult to replace,

Hope this helps

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Need help location of the hazardous fuse on my Chrysler New Yorker Fifth Avenue 1990

Dear Willie,
Not to familiar with what a hazardous fuse is, but you fuses are in two locations.
Most of the electrical systems inside the car , the fuses are found under the dashboard.
Heavier circuitry fuses and circuit breakers are inside a black plastic box under the hood of the car
If you are asking about the fuse for the hazard lights, that should be under the dash.
Check your owner's manual.
God bless your efforts.
0helpful
1answer

Engine fan does not turn on....

fan motor, relay, fuse, no signal from computer
A mechanic will check for voltage at the motor and work backwards.
0helpful
1answer

1990 chrysler new yorker 5th ave 3.3 L I changed the turn signal flasher, and now the electronic dash, radio, overhead computer, dome lights and door lights are dead. checked fuses. still...

On website www.reliable-store.com has the largest collection
of repair, service, parts manuals of any vehicle on earth. Best website I came across for repairing, servicing or manuals.. Very helpful website
2helpful
1answer

1990 chysler new yorker wont start

check fuses and relays before suspecting the pump. if fuses and relays are good, access the fuel pump power connector and check volatage
0helpful
2answers

1990 Chrysler New Yorker cooling fan no power

Open the drivers door pull the end off of the dashboard and check fuses for heater fan
1helpful
1answer

Need to know where the flasher relay fuse is located on a 1993 Chrysler New Yorker.


The fuse panel is located under the instrument panel to the left of the steering column.

The hazard and turn signal flashers are located on the relay module.

HOPE this HELPS EASY way to DETERMINE witch one is for turn Signals is to Turn ON HAZARD FLASHER and this shows that the other one is for turn Signals PLEASE REMEMBER TO RATE ME MOST FOLKS DONT remember to. THANK YOU AND GOOD LUCK
0helpful
1answer

Can't find turn signal relay.

check the hazard switch on some cars its part of the hazard switch or if the conection is bad they none of it will work.
0helpful
1answer

1987 chrysler new yorker blinker not working replaced the lights

Just saw this post. Maybe you've already found the answer by now. I have an 87 new yorker. i have the manual that came with the car. The fuse box should be under the stearing column to the left. Cover pops off. The turn signal lamps take a 20 amp fuse. it goes in cavity #10
0helpful
1answer

Signal Lights and hazard lights don't work.

Try lower or under the dash on drivers side, in with fuses.
Not finding what you are looking for?

648 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...