Need a serpentine belt diagram for a 1999 Pontiac Bonneville

SOURCE: 1999 Pontiac Bonneville serpentine belt installation.

if you look by the crankshaft pulley to the right you will see a tubular looking shaft about 1" diameter , you will notice you can't get the belt out from under this piece , it has a nut on it , once you take the nut off , you will notice it has a star shaped point on the tip of the stud , it requires a reverse torx socket or wrench to remove the stud , when you get the stud out the tube piece it can be removed , then the belt comes off , replace the belt , now comes the tricky part , fitting that tube spacer back into its spot , it can be difficult , once its in place put the stud back in , and put the nut on and tighten it , your pretty much a pro now . thanks.

SOURCE: pontiac bonneville 1996 3.8 l a/c.

Below is the diagram you requested. Please return to rate this solution. Thank you very much.
Greg

SOURCE: I'm looking for a diagram

This picture should help you:

autodr

• 260 Answers
• Posted on Dec 02, 2008

SOURCE: serpentine belt diagram for a 1996 pontiac bonneville?

hope this is what youre looking for

SOURCE: Serpentine Belt diagram for 2001 pontiac

Below is the diagram you requested. Please return to rate this solution. Thank you very much.

Testimonial: "Thank you. You helped alot. Took off the belt not knowig their was not a diagram label on the car somewhere or in manual. Thanks again. J. Seats"