2001 jeep Tj pdc diagram trying to locate fuse for

nothing on dash means the whole IP cluster is dead.? (fuses)_
Fuses are first, repeat 3 times for effect.
front and rear turns dead or?
tell what does work all and does not,
telling just one thing bad, is not really usefull.
for sure power feed wise.
head lamps work and park?????? keyoff and on work.
horn works
brake lamps dead?
engine runs good.
I just sold my 2002 wrangler the last good real jeep it was, my bad selling it.
i have all jeep service manuals so easy to answer this 88 to 2010
on most cares I fix dead headlamps first it is hardwired to work at an any time and super simple if not DRL JUNK .

02 TJ jeeps (pure love)./
chapter 8w-52 'turns 'blinks, hazard]s
fuse 7 and 13 not blown
combo flasher not dead. 5 wires. and one pin is IGN, oops.
ign is fuse 13,oops, is it blown/
Hazards dead is same fuse and same InG fuse good.
IGN power comes form KEY switch page 8w-11
IGN switch wire BK-DG , 12vdc key on. if not fuse14 blown 20ams
and goes to the battery direct.
all fuses in the PDC must good, and now dead batteries
or its 4 cable logs ends, loose or rusty.
end.

fuse 10 and and F24 kills the cluster. and f15
fuse is 10 head lamps too and a CB breaker.
fuse 7 dead kills park /neutral switch ,

Question edited for clarity.
Question moved to make year model category.

All the fuses and their functions are here

Fuse Box Diagram Jeep Wrangler (TJ; 1997-2006)

https://fuse-box.info > jeep > jeep-wrangler-tj-1997-20...
The fuse panel is located behind the glove box. The location of the fuses in the passenger compartment: Jeep Wrangler (TJ; 1997. To access ...

..

Flasher Module

https://www.google.com/search?q=1995+buick+regal+turn+signal+flasher+location

Buick Regal (1995) - fuse box diagram - Auto Genius

https://www.autogenius.info > buick-regal-1995-fuse-b...
Jan 16, 2017 - Buick Regal (1995) - fuse box diagram. Year of production: 1995. Instrument Panel Fuse Block. Some fuses are located in a fuse block on the ...

Fuse Box Diagram Buick

https://fuse-box.info > Home > Buick
Fuse box diagram (location and assignment of electrical fuses and relays) for Buick Regal (1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004). Buick Regal (2011-

Fuse 18 or 19

Fuse Box Diagram Jeep Wrangler (TJ; 1997-2006)

https://fuse-box.info > jeep > jeep-wrangler-tj-1997-20...
The fuse panel is located behind the glove box. The location of the fuses in the passenger compartment: Jeep Wrangler (TJ; 1997. To access ...

1997-2006 Jeep Wrangler TJ Fuse Box Diagram

https://knigaproavto.ru > shemy > 920-1997-2006-jeep...
Oct. 8, 2019 - Fuse Box Diagram Jeep Wrangler engine: 2.4L, 2.5L and 4.0L (TJ; 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006)

Turn signals are usually very reliable and problems mostly begin when a bulb is carelessly replaced. Other than this most problems are related to the hazard warning switch which tends to be used so infrequently the internal switch contacts become dull or dirty and so when it is operated causes turn signal problems, including them not working at all.

Usually spending a few minutes rapidly operating the hazard switch puts matters right.
It is also worth checking the fuse(s) before resorting to voltmeters and wiring diagrams.

i think you ment IP cluster backlights dead not warning ligts
that is real the huge parking light structures.
a blown fuse. it is, why not test them ? first.

either cab fuse or the engine bay fuse box.
12vdc on both sides of fuse, is a good fuse, key on.
100% accurate test. no guessing. ever with voltmeter.
(rare exceptions a car with a ground fuse, very rare)
so lets do this the hard way, no fuse tests......

but hark the fsm is free. why not just look at the road map er, schematic, (wiring diagrams)
lets do HL , they are hot all the time, keys lost .

your car is a TJ so having a TJ book is spiffy , no? KEEN?
lets do that. TJ wiring
click TJ
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

now click wiring, following me?
posted this 100 times,., here.

my guess is parks are dead High beams good, right, ?????
yes then go to JUMP 1.
HL dead highs and low beam? parks out.(aka TAIL)
PDF page # 92
fuse PDC #17 blown? kills cluster dead too
JUMP1: parks dead.
had lamps is fuse #1, jb (page 134 pdf)
then PDC fuse 4 and 10 (lows and highs)

PDC is engine bay box.
JB is cab box.

so my guess (hard way)
fuse 10 and CB 24 was blown. kills high/low beams
Fues1 and 4 only parks. and cluster dimmer feed.

page 134 makes all this childs play with a meter.
volt meter.

are the hazards dead too? on all 4 corners.?
all fuses in all fuse boxes.
and checked the with ohm meter, not just glance?
PDC fuse 9 good?
FB fuse 13 good.?

info center the speedo cluster is dead?
pdc 17 fues and FB 10 fuse run the cluster

see wiriing chapter here.
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

its all there. use a simple volt meter to find cause.

Word to the wise, Theres fuses also in the junction box. Its located in passengers front kick panel. You are having trouble with several fuses. PDC maxifuse 5 is for headlamp switch . owners manual says theres a fuse panel under LH steering wheel. Find yours. then check all fuses with a test light. Theres supposed to be a relay center to the right under the dash. hmm. Better check behind kick panel RF for that too. Dual flasher is supposed to be there, nearby (relay center). Now goto the public library and have them show you the mitchell database. If they have one. There is also a tsb for towing relays interacting with turn signls (missing wire???) and updates for many PDC boxes(fuse links and various relay repairs). Theres updates for diagrams, connector pin views and vehicle locations. jeep has been kept in disarray with many owner changes as a company. Your search has just begun. Bring a fresh cup of coffee and plenty of spare change to get prints of their updated info. The factory manuals and schematics are inundated with misdirection and upside down pictures. I read recalls first and then tsb's then "dealer info". painstakingly checking each figure is the only way to happen upon it. I dont think Eugene could read, so be careful and map out the testing your own way. happy jeep!!! It seems every jeep is special in its own way. Hopefully yours isn't as special as the (no start)(no spark) grand cherokee I have been working on. I found a plug with 3 wires where the schematic lacked the p/s wires. and this was on the transmission neutral/start!!! and connected to start enable at the pcm.!!! Pray for me. or the jeep. back up lights are PDC fuse 11. auxillary lights are PDC fuse 13. dome/courtesy is PDC 16. turn signal flasher fuse is jct box cavity 8. courtesy,radio, clock and memory etc. are fuse cavity 9 jct box. headlamp delay module is jct cavity 11. instrument lights are with clock, radio /clock and memory,headlamp switch,and yes you guessed it, park lamps they are jct box cavity 15 . trailer tow is 16. 17 is gages, headlamp delay module, chime module,ovrhd cnsl. 19 is instrument panel lamps, and radio illumination. circuit breakers are often inside the lightswitch. if you have class III towing theres a circuit breaker located somewhere" near" the jct box. Be sure and answer with a detailed rendition of the findings you incurr. Harbor freight has DVOM's and wiring repair supplies. See also Ace Hardware or Radio Shack. our local car parts stores have ideas as well as tools and supplies. all the best!!

Check this diagram (click over pic for zoom)...



Check the postion F4 / 15 Amp ( Lt. Blue ) Flasher, hazard switch (see Junction Block diagram above for location of turn signal Flasher relay - Mopar p/n 4686094)

Repair tip: WJ flasher repair.

Hope helps.

CAV CIRCUIT FUNCTION 1 Z13 12BK GROUND 2 B40 12LB TRAILER ELECTRIC BRAKE OUTPUT 3 L76 12BK/OR TAIL LIGHT (Trailer Tow Relay in PDC) 4 A6 12RD/TN* FUSED B(+) (40A, Always Hot, F8 in PDC) 5 L63 16DG/RD LEFT REAR TURN SIGNAL TRAILER TOW 6 L62 16BR/PK RIGHT REAR TURN SIGNAL CONNECTOR 7 L1 16VT/BK BACK-UP LAMP FIGURE 1: 7-Terminal Trailer Tow Connector