Question about 1997 Chevrolet Blazer

2 Answers

How do i get to the fuel pump on a 1997 s10 blazer

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

Unless there is an access panel inside the vehicle above the fuel pump, you will have to remove the fuel tank in order to access the pump. Do not forget to replace the fuel filter. Partially clogged fuel filter is one of the causes of a failed fuel pump.

Posted on Oct 10, 2009

Testimonial: "thanks"

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

In a blazer you have to drop the gas tank.had to replace fuel pump in my 2001 chevy blazer only took about 1 1/2 hours.

Posted on Oct 13, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

1997 chevy blazer what could it be


I had a 1997 s10 4*4 with the 2.8 v6.
mine do that I had to pull the gas tank replace fuel filter plus had to take undo the line from the intake and blow air thru it. Make sure all u're filter are replaced and y u have the tank down replace the fuel pump. I hope this helps u

Jun 23, 2014 | 1997 Chevrolet Blazer

1 Answer

What # in the fuse box gos to the fule pump to a 1997 S10 truck


bad392e5-e7e0-4b50-b752-b2ea6b77d0b9.gif

look for f/pump relay try to swap relay with the same one

hope it helps

Mar 22, 2014 | 1997 Chevrolet Blazer

1 Answer

1997 blazer will not start.New fuel pump,it purges,starts with stater fluid.


My 97 S10 had the same problem and the computer was bad.

Good luck.

Oct 15, 2010 | 1997 Chevrolet Blazer

1 Answer

Where is the fuel pump relay in the 97 blazer s10??


It is in the "Fuse And Relay Center", black box on the driver side fender well, under the hood.

Jun 13, 2010 | 1997 Chevrolet Blazer

1 Answer

1997 chevy s10 blazerdash wont light up when key


the dash sound's like a fuse, check the fuse box under the hood and in the door jamb on the side of the dash, also check your fuel filter and fuel pump, im betting on the pump because i have a 2001 chevy blazer that has had two replaced and it has 233000km on it!

Jun 04, 2010 | 1997 Chevrolet Blazer

3 Answers

Where is the fuel pump relay fuse on my 1996 chevy blazer s10


underhood relay center has fuel pump fuse

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/thomas_c50676e836a18949

Jan 08, 2010 | 1997 Chevrolet Blazer

1 Answer

1997 chevy blazer S10 replaced the fuel pump & fuel filters it only cranks if you put gas straight into the fuel injection but wont stay running we checked every thing we could think of. we were told...


I've not heard of an "oil reset" like can be found on lawn mower engines.

Were the replaced items new or used?

Did you check the fuel pump fuse?

Is there a bleed port on the fuel injector rail, and if so, did you bleed the air from the fuel rail (this may be the reset that you were told about) ?


Dec 21, 2009 | 1997 Chevrolet Blazer

2 Answers

97 s10 blazer cuts out and loses power while driving.


Had the same problem with by 1998 S10 a couple years ago. Changed fuel filter?? didn't work. Changed the fuel pump?? didn't work. Changed the fuel pressure regulator?? didn't work.

I was about to the end of my rope when I put a timing light on it and it showed firing on cylinders more then once a cycle. Turns out my distributor cap was bad and spark was jumping between contacts. When a spark is spread out over more then one cylinder, it doesn't fire correctly and that is causing it to bog out. Simple and a lot cheaper then all the other fixes I tried. Crank sensor was my next option though.

Feb 01, 2009 | 1997 Chevrolet Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...