2000 Ford Expedition Logo
Anonymous Posted on Oct 12, 2009

Need to know where fuse for trailer lights hookup is located on a 2000 ford expedition eddie b edition

1 Answer

Charles McElchar

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 389 Answers
  • Posted on Oct 12, 2009
Charles McElchar
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Mar 13, 2009
Answers
389
Questions
3
Helped
168234
Points
1149

The trailer light's are just connected to the wire's going to the tail light's so the tail light stop light and indacator's are using the same fuse as your car. If all the light's on the trailer are not working and the tail light's on the car are then most likely it's a bad ground connection. Only one ground wire is connected to the plug so all the light's depend on it.

Testimonial: "thanks very helpful"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I hav a 2000 ford expedition eddie bauer edition I need to know which fuse is the ignition switch relay and where

See this extract from manual pg 161, in fuse panel fuse number 21, colour blue, see guide attached here.. fuse panel in cab as described in manual down by drivers side,

either that or under bonnet are power distribution high capacity fuses 112 (30A) and 113 (40A) ignition battery supply fuses see extract from manual

https://preview.tinyurl.com/y92pb9d2
0helpful
2answers

1998 Ford Expedition Eddie Bauer SERVICE ENGINE SOON light

Take the vehicle to any local auto parts store that will read the codes. WRITE THEM DOWN, and report back here for further help.
7helpful
1answer

Location of Shift Solenoid in 1999 Ford Expedition Eddie Bauer?

They are round "cans" with wires attached. You should have SSA, SSB, SSC, Torque converter and Pressure Control solenoids. They control pressures and have no mechanical linkage.
3helpful
1answer

THE BRAKE LIGHTS AND THE TURN SIGNALS ARE NOT WORKING ON MY TRAILER. EVERYTHING WORKS ON MY TRAILER WHEN I HOOK IT UP TO ANOTHER VEHICLE. IM THINKING IT IS A FUSE ON MY 1998 FORD EXPEDITION BUT I DONT HAVE...

Did you guys ever solve the issue with your trailer wiring? I have a 2000 Expedition with only one brake light on three different trailers no other lights work. They were working fine and the work fine on other vehicles. I know it could be anything but I'm not sure if it's a known issue that the plug by the rear wheel back to the adapter gets bad or if there is a typical issue that lies elsewhere. I'm just trying to find where to start????
0helpful
1answer

2000 ford expedition eddie bower suspension

If you change the standing height of your 2008 silverado this could void your warranty.Please check with your local chevy dealers service dept.Best of luck.
2helpful
3answers

2000 ford expedition eddie brauer edition - starts by itself

your problem is caused by water leaking through teh windshield onto the fuse panel and what is called a gem (generic electronic module) have the windshield resealed
Not finding what you are looking for?

912 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...