At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
For the Toyota Nadia with the 3S-FSE-D4 engine, you can find the fan belt and A/C belt using the following specifications:
1. Fan Belt: - The fan belt for the 3S-FSE-D4 engine should have the following specifications, which you can use to find a replacement: - Part Number: 90916-02400 - Dimensions: 6PK1955 (6 ribs, 1955mm length)
2. A/C Belt: - The A/C belt for the 3S-FSE-D4 engine should have the following specifications: - Part Number: 99364-20840 - Dimensions: 5PK1060 (5 ribs, 1060mm length)
When replacing the belts, it's important to ensure that they are installed with the correct tension to prevent any high pitched noises or premature wear. If the belts are making a high pitched noise, it could indicate either wear or improper tension. It's recommended to inspect the belt tensioner and pulleys for any signs of wear or damage while replacing the belts.
Additionally, it's a good practice to check for any misalignment of the pulleys as this could also cause excessive noise and premature wear on the belts. Once the new belts are installed, check the tension according to the manufacturer's specifications to ensure proper operation and minimize noise. If the noise persists after belt replacement, further inspection of the A/C compressor and other related components may be necessary.
What you are hearing is the power steering belt slipping Screeching noise? Retighten all the front belts They will have "settled in" a bit after being refitted after cam job
When you have the belt off, spin that idler pulley and see if it turns easily or makes noise. Check if the bearing feels good and smooth or if it wobbles any. While you are at it, check the fan and fan clutch to see if they turn smoothly also. There should be some resistance to the fan clutch, and make sure the fan isn't rubbing on anything.
Replacing the idler pulley is usually done as a unit since the bearing is part of the pulley.
If the noise going away every time u turning off the ac it's probably your ac compressor belt.however i will suggest to take some vaseline and rub it all over the exposed parts of your drive belt.
×