At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No sir they will not interchange. i worked at a transmission shop for 7 years. the inline 6 has a 500 trans in it and the v8 has a 518 trans in it. the bellhousings are different.
There is the coolant sensor that tells the computer the temp,and the computer sends a signal to the cooling fan relays,and the relay turns the cooling fans on,and off,if the system is low on coolant,or has air in the cooling system,then the cooling fans would not come on,or the sensor is bad,if this was at all helpful,please rate,thank you.
The 46rh is a hydraulic transmission as where the 46re is an electric transmission. With minor wiring you can replace the 46re with the 46rh but not the other way around. Your transmission would stay in limp mode and wouldn't shift out of 2nd gear. So the answer is no.
Go straight to your local transmission repair centre, they will be able to diagnose the fault and repair it for you. Also check your transmission oil, Engine running at normal working temp, in park (P) remove dipstick, on your left at the back towards the bulkhead. check level if low top up only half a litre at a time. if low put in half a litre of the correct fluid(available at your jeep dealer) put foot on the brake and put into reverse (R) then put into drive (D) put back into P and recheck if still low add another half litre and repeat process. When level is correct test drive, if all is ok, take to transmission shop to find the leak. repair and all will be well. Hope this helps.
×