I hate to have to tell you this, but the 2.4L (4g64) is an interference engine. That means when the timing belt broke, the pistons hit the valves, causing at least a few of them to bend.
here is the overhaul section of the factory service manual for the 2.4L. its technically from the eclipse manual but it will work for the galant. The intake manifold and exhaust manifolds may not be the same but the head, block and timing belt sections are exactly the same.
http://tearstone.com/eclipsefsm/GR00007100-11B.pdf
also here is a walk thru (with pics) for the timing belt procedure:
denlorstools com
SOURCE: 1995 galant broken balance shaft belt
You sould replace the belt along with the timing belt. If it gets caught in the timing belt you will have MAJOR EGINE DAMAGE!
SOURCE: I am trying to set the timing mark on a 1996 honda
get a book i dont thing you have a clue whats going on here . you set the crank shaft and the came shaft marks on a 2.2 thats it . if you go to mitchell repair manuals you can buy a manual for $9.99 . may save you a big head ach
SOURCE: 1992 Volvo 960 Broken timing belt
IF U BROKE THIS BELT WHILE DRIVING U HAVE BENT THE VALVES IN THE ENGINE, THIS IS WHAT IS CALLED AN INTERFERENCE DESIGN ENGINE, THAT MEANS WHEN THE TIMING BELT BREAKS THE PISTONS HIT THE ENGINES VALVES
Testimonial: "THanks - was not able to accept this last answer, but thankfully I found another way to say THANKS. That notch was suspicious!"
641 views
Usually answered in minutes!
×