95 ford ranger 2wd horn does not work and the gas gauge doen't either signal from horn button works and have changed relay with new one if i cross wires in relay horn sounds. What gives?
This is what I have for your horn wiring diagram. The relay has two sides, the switch side,right side in diagram, and the control side, left side in diagram. The control side needs voltage and ground to energize relay, top wire is voltage and bottom wire is ground on that side. My guess is problem with wiring in steering column--clockspring or horn switch. If you unplug relay, use jumper wire on switch side cavities, the horn should sound, if so, the problem is on the control side of relay. Just my opinion.
Same problem with 1995 Ford Aspire. Fuses good and was told its the wiring cluster under the dashboard?????
Might be a blown fuse
480 views
Usually answered in minutes!
×