You need to remove the air box on top of the engine to get access, then pull the ignition leads up and out of the sleeve. You will need a deep 14mm 3/8 drive socket and long extension ( the sleeve is 20mm wide and the socket from halfords just fits ) to unscrew the plug and then a magnet on a stick to retrieve the spark plug
SOURCE: i have dirty water getting into the spark plugs of
What happen at some time or another your engine got hot, now the head gasket is damage and letting water go where it should'nt. The only fix for this is to have your head gasket replace and the cylinder head check for crack's and resurfic, also they'll need to fine out why it over heated in the first place . Good luck
7,788 views
Usually answered in minutes!
×