At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Thanks. I did miss asking the question I really had. The panel on the door that covers the screws holding the mirror, is it attached with a screw or does it just snap on? Thank you.Thanks. I did miss asking the question I really had. The panel on the door that covers the screws holding the mirror, is it attached with a screw or does it just snap on?
Thank you.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the mirror housing is in place, Have one cut to fit. Glue it in. If the housing is broken, replace all of it. You can't fix a broken side mirror. Tried to many times.
Go to a breakers yard or ford, you will have to unscrew & pull off the interior cap on the insde to udo the mirror whole unit & pop the glass out of the old unit by pulling carefully, then disconnect the motor & wiring, then re-fit as dismantled.
Hope this helps, If you can't do it yourself then buy the mirror & take it to a decent garage as they are not hard to replace & the dealership will charge twice as much !
Hope this helps !
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
pull off the black triangle panel from the inside of the door opposite of the mirror. there is a gold 10mm bolt and a 1 black torx 20 bolt. unplug the connector and fish through the new one.
there are two screws that hold the mirror on one is at the edge of the door frame and the other is behind the trim piece by the window the knob cover just twists off no adhesives needed
Usually its easier and cheaper to buy the whole assembly rather than try to just replace the mirror. If you go to a junkyard and buy it there they will show you how to do it.
Thanks. I did miss asking the question I really had. The panel on the door that covers the screws holding the mirror, is it attached with a screw or does it just snap on?
Thank you.
×