Question about Nissan Xterra

3 Answers

How to replace rear wheel bearings on a Nissan X-Trail

Posted by on

  • 7 more comments 
  • traceyp167 Nov 05, 2009

    Does anyone have any detials on how to replace the rear wheel bearings on a 2006 Nissan X-Trail, 4 wheel drive.

  • traceyp167 Nov 05, 2009

    The recall you refer to is an Xteria. My Nissan is an X-Trail, totally different vehical. Please provide the information required to replace the wheel bearings myself.

  • traceyp167 Nov 05, 2009

    Sorry. Are you able to help me with providing information on the replacement porcedure for the 2006 X Trail rear wheel bearings /



    Paul

  • traceyp167 Nov 05, 2009

    Does anyone have the detailed information need to change the rear wheel bearings on a 2006 Nissan X-Trail.

  • traceyp167 Nov 05, 2009

    Thanks. Email mail me the silution when you get it. I haven't accept this as a solution yet. I will when you pass on the info.



    Thanks....Paul

  • traceyp167 Nov 05, 2009

    No, not yet. Another expert contacted me indicating he is get the info from a buddy but i haven't got it yet.



    paul

  • traceyp167 Nov 05, 2009

    Okay, thanks....

  • traceyp167 Nov 05, 2009

    I would like to replace the rear wheel bearing on my 2006 Nissan X-Trail. I would like a detailed procedure.

  • traceyp167 Nov 05, 2009

    I havn't tried it yet. I hope to start today. i get back to you. thanks

×

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 192 Answers

Easy to do. take wheel off. take ball joint o if applicable if not disregard. take off knuckle and press bearings out pack new bearings with grease. and assymble hope this helped

Posted on Nov 05, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello there

I mailed one of my informants at nissan now, and he will be able to give me detailed instructions on how to replace the rear wheel bearings on a nissan x trial. If you choose to accept the sollution and want feedback on how to replace it, my email is andreadonaggilock@gmail.com.

Best regards
Andrea

Posted on Nov 05, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 85,216 Answers

Are you aware o this recall??

'03 Nissan Xterra Recalls How to replace rear wheel bearings on a Nissan X-T - section_opened.gif Recall ID # 02V299000 - SUSPENSION:REAR Recall Date: NOV 12, 2002 Component: SUSPENSION:REAR Model Affected: XTERRA Potential Units Affected: 143000 Recall Details
Recall Date:NOV 12, 2002

Model Affected:2003 NISSAN XTERRA

Summary:ON CERTAIN PICKUP TRUCKS AND SPORT UTILITY VEHICLES, WATER MAY ENTER THE REAR AXLE HOUSING DUE TO INADEQUATE SEALING OF THE ANTI-LOCK BRAKING SYSTEM (ABS) SENSOR.

Consequence:THIS CAN RESULT IN CORROSION AND EVENTUAL FAILURE OF THE WHEEL BEARING. IF THIS OCCURS, THE WHEEL ASSEMBLY COULD SEPARATE FROM THE VEHICLE INCREASING THE RISK OF A CRASH.

Remedy:DEALERS WILL INSPECT THE REAR AXLE FOR WATER INTRUSION AND ANY AFFECTED COMPONENTS WILL BE REPLACED. THE ABS SENSOR WILL BE RESEALED TO PREVENT WATER INTRUSION. OWNER NOTIFICATION BEGAN DECEMBER 10, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT NISSAN AT 1-800-647-7261.

Potential Units Affected:143000

Notes:NISSAN NORTH AMERICA, INC. R2019

Posted on Nov 05, 2009

  • 2 more comments 
  • Marvin
    Marvin Nov 05, 2009

    sorry u have it listed as an xterra.

  • Marvin
    Marvin Nov 05, 2009

    that is the size of it, sorry, sorry I tried.

  • Marvin
    Marvin Nov 05, 2009

    DID YOU GET THE INFORMATION HERE?

  • Marvin
    Marvin Nov 05, 2009

    I WILL KEEP LOOKING.

×

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 80 Answers

SOURCE: How to replace a rear wheel bearing 1996 nissan

  • Remove tire
  • Remove brake caliper assembly
  • Remove brake rotor
  • Remove hub cap
  • Remove cotter pin
  • Remove wheel bearing lock nut & washer
  • Remove wheel hub bearing from spindle
to install wheel bearing nut torque to 137 Ib to 188 Ib

Posted on Sep 27, 2009

Anonymous

  • 2 Answers

SOURCE: how do you change rear wheel bearing on a 2004 nissan sentra

Its a rear wheel bearing on a sentra. Front wheel drive. In regards to landsend.

Posted on Mar 21, 2009

idare_ya

  • 95 Answers

SOURCE: nissan sentra gxe 03 rear wheel hub bearing problem

Easy job ! just rem to get a gear puller for the antilock gear and install same as came off old one Parts around 100$ each apx 1/2 hr each side

Posted on Oct 15, 2008

pal03246

Phil Lovisek

  • 726 Answers

SOURCE: How to replace drivers side rear wheel bearing on

lets start with this. call you nissan dealer to see if you have a "rear axle campaign" which would be free of charge. nissan had some models with water intrussion issue where water gets inside of the rear end/axle assemblies through the ABS sensor hole and it would cause rusting issues and bearings have to be replaced in some cases. call your dealer and give them your VIN number to check it for the campaign. you may also have a campaign for fuel tank sending unit, where nissan replaces sending unitsinside of the tank and in some cases even the whole gas tank depending on how much rust is on top of the tank. call you dealer first. if you dont have any campaigns, than you will still have to take it to a dealer, because of the specialty tool that you need to get the bearing assembly apart and replaced.

Posted on Sep 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my Nissan x trail out of 4 wd and back to 2 wd


If the tyres are worn more on the front then the rear it can cause wind up, jack up a front or rear wheel , this should free the wind up , and 2 wheel drive can be selected .

Jun 30, 2018 | Nissan Cars & Trucks

1 Answer

How do I replace the rear wheel bearing in a 2010 Nissan dualis


Not sure on the Dualis, but Nissan usually has four bolts holding hub/bearing assembly on from the backside. If you have rear disc brakes and the parking brake shoes are inside the hub/rotor, this needs to be removed to access it. Hope this helps

Apr 21, 2015 | Nissan Cars & Trucks

1 Answer

Can i put the front right abs wheel speed sensor on the left rear of a 2005 nissan x-trail?


Not sure of your exact vehicle as I have not had to work on one, but usually the wheel speed sensor is interchangeable from side to side, but not front to back.

Sep 06, 2014 | 2005 Nissan X-Trail 2.5i

2 Answers

I HAVE A 2010 NISSAN MURANO...I HAVE A LOUD NOISE COMING FROM MY CAR THAT SOUNDS LIKE A JET ENGINE TAKING OFF/WINTER TIRES ON A CAR...I REPLACED MY 2 FRONT TIRES BECAUSE IT WAS NEEDED AND ACTUALLY THOUGH...


That most likely is a bad wheel bearing my friend. Jack each corner of the front and see if the wheel and tire will "shake" by trying to move the top of the tire in and out. On rear wheel drive vehicles, the rear axel will move in and out or op and down. If you spin the rear tire you may hear the grinding noise. Change that bearing where it moves or is noisy.

Nov 03, 2017 | Nissan Murano Cars & Trucks

2 Answers

Procerure to replace wheel bearing assy 2004 nissan altima 4cyl


Go to YOU TUBE and put in replacing wheel bearing hubs for
nissan altima & watch

There is a lot to see even if on a different vehicle

I doubt you have the tools to do the job

Sep 19, 2012 | Nissan Altima Cars & Trucks

1 Answer

How to replace a rear wheel bearing 1996 nissan maxima gle


  • Remove tire
  • Remove brake caliper assembly
  • Remove brake rotor
  • Remove hub cap
  • Remove cotter pin
  • Remove wheel bearing lock nut & washer
  • Remove wheel hub bearing from spindle
to install wheel bearing nut torque to 137 Ib to 188 Ib

Sep 26, 2009 | 1996 Nissan Maxima

1 Answer

Does hub need replacing when replacing a wheel bearing


rdfairfield: if you are asking about the rear? Yes, that is the only way the part comes and is manufactured. It is a hub and bearing assembly..

Apr 21, 2009 | 2002 Nissan Sentra

3 Answers

How do you change rear wheel bearing on a 2004 nissan sentra


Yes it is as easy as it looks. If you had the tire off and figured out that it looks easy, you shouldn't have much problem.

Mar 21, 2009 | 2002 Nissan Sentra

3 Answers

Nissan sentra gxe 03 rear wheel hub bearing problem


Easy job ! just rem to get a gear puller for the antilock gear and install same as came off old one Parts around 100$ each apx 1/2 hr each side

Jun 12, 2008 | 2003 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

8,118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...