2000 FORD TRUCKS F250 HD PICKUP 6.8L 10-cyl Engine Code
Engine Oil: All TEMPS......5W-20
Controlled Slip Differential, Rear Dana 80. ALL TEMPS......75W-90
Standard Differential, Rear Dana 80. ALL TEMPS......75W-90
Standard Differential, Rear Dana 135 ALL TEMPS......80W-90
Controlled Slip Differential, Rear Ford. ALL TEMPS......75W-140
Standard Differential, Rear Ford.. ALL TEMPS......75W-140
Controlled Slip Differential, Rear Dana 135 ALL TEMPS......80W-90
Differential, Front......GL ALL TEMPS......75W-90
CAPACITIES:
Engine, with filter..........5.7 liters
Cooling System, Initial Fill..........29 liters
Automatic Transmission, 4R100 Initial Fill..........6.1 liters
Automatic Transmission, Total Fill 4 speed 26 Plate 4R100..........16.7 liters
Manual Transmission, 5-SPD Mazda..........3.6 liters
Manual Transmission, 5-SPD ZF..........3.2 liters
Manual Transmission, 6-SPD W/ OCOOL..........6 liters
Differential, Front..........2.8 liters
Differential, Dana 50 Front..........1.8 liters
Differential, Dana 60 Front..........2.7 liters
Differential, Dana 135 Rear..........11 liters
Differential, Dana 80 Rear..........4 liters
Differential, Ford 10.5 Ring Gear Rear..........3.3 liters
Transfer Case, ..........1.9 liters
TORQUES:
Oil Drain Plug.....17 ft/lbs
Manual Transmission
Fill Plug 25-30 ft/lbs
Drain Plug 25-30 ft/lbs
Transfer Case NV271
Fill Plug 20 ft/lbs
Drain Plug 20 ft/lbs
Just a few information that should help you. Good luck
It should be listed in the owners manual, but because of different oil cooler setups you may have to do the change yourself and add oil until the correct level is established..... for the first oil change.
Most likely 7 liters,but start with 5,run the engine to fill the oil filter,let it sit for 5 mins and recheck and fill to full.
Note the amount needed for next time.
811 views
Usually answered in minutes!
×