Hi I have a 98 Chevy S10 4.3l with 117,000 miles on motor and transmission.
I cannot get the truck to shift into second while the truck is in motion, at high and low rpms and double clutching. I can shift into 2nd gear with the truck parked. The slave cylinder has been replaced. Here are my other concerns: When I press in the clutch, I hear a whining/light scratching noise which could be what, a throw out bearing? When I let out the clutch it quietens down. The clutch pedal seems stiff and doesn't engage until about an 2 inches from the floor. Transmission fluid is full and good, so is clutch slave cylinder reservoir.
I guess my big question is, do I need to get this trans rebuilt because of synchros being bad on 2nd gear?
1,334 views
Usually answered in minutes!
Sorry I forgot to add this pertinent information.
The following things have been replaced less than 2 years ago.
Master Cylinder, Slave Cylinder, rebuilt pressure plate, rebuilt pressure plate disc, resurfaced flywheel.
Sorry I forgot to add this pertinent information.
The following things have been replaced less than 2 years ago.
Master Cylinder, Slave Cylinder, rebuilt pressure plate, rebuilt pressure plate disc, resurfaced flywheel.
×